- ページ 22

オール・イン・ワン・プリンター Brother MFC-J6720DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J6720DW 45 ページ。 Brother all in one printer
Brother MFC-J6720DW にも：安全マニュアル (21 ページ), 製品安全マニュアル (20 ページ), 製品安全マニュアル (25 ページ), 安全マニュアル (20 ページ)

ページを印刷する

Wired Network

When the Firewall/AntiVirus detected screen

appears, choose Change the Firewall port

settings to enable network connection and

continue with the installation.

(Recommended), and then click Next.

If you are not using the Windows

the instructions provided with your firewall

software for information on how to add the

following network ports.



For network scanning, add UDP port 54925.



For network PC-Fax receiving, add UDP port

54926.

If you still have trouble with your network



connection, add UDP ports 137 and 161.

NOTE

• If there is more than one machine connected to

the network, choose your machine from the list,

and then click Next.

This window will not appear if there is only one

machine connected to the network, the

machine will be chosen automatically.

• If your machine is not found over the network,

confirm your settings by following the

on-screen instructions.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another.

NOTE

• DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

• If the Windows Security screen appears, click

the check box and click Install to complete the

installation correctly.

Firewall, see

NOTE

• If an error message appears during the

• Depending on your security settings, a

Windows

If the Environmental Advice for Imaging

Equipment screen appears, click Next.

When the On-Line Registration screen

appears, follow the on-screen instructions.

Click Next.

If you do not want to set your machine as the

default printer, clear the Set as Default Printer

check box, and then click Next.

When the Setup is Complete window

appears, confirm the settings, and then click

Next.

Finish and restart

Click Finish to restart your computer. After

restarting the computer, you must log on with

Administrator rights.

software installation, do one of the following:

- Windows

XP, Windows Vista

Windows

7 users: Run the Installation

Diagnostics located in

All Programs > Brother > MFC-XXXX LAN

(where XXXX is your model name).

- Windows

8 users: To run the Installation

Diagnostics, double-click

Utilities) on the desktop, and then click the

drop-down list and select your model name

(if not already selected). Click Tools in the

left navigation bar.

Windows

Security or antivirus software

window may appear when using the machine

or its software. Please allow or permit the

window to continue.

and

(Start) >

(Brother