- ページ 15

ホブ AEG 33320 DK-MのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 33320 DK-M 18 ページ。 Electric built-in hob

Securing the hob into the cut out

Before fitting the hob into the cut out, the sealing gasket supplied with

the hob must be fitted to the edge of the cut out. It is essential that no

gaps are left in this seal in order to prevent spillage near the hob

seeping into the cabinet below.

1) Place the sealing

gasket all around the

edge of the cut out.

2) Place the hob into the

cut out and secure it

by means of the

relevant fixing clamps

and screws, as

shown in the diagram.

The edge of the hob

top will cut the

exceeding gasket,

which will then be

easily removed.

Proper arrangements must be taken

in designing the furniture unit, in order

to avoid any contact with the bottom

of the hob which can be heated when

it is operated.

The recommended solution is shown

in diagram.

The panel fitted under the hob should

be easily removable to allow easy

access if technical assistance is

needed.

Installation

sealing

gasket

Removable

panel