- ページ 21

オール・イン・ワン・プリンター Brother MFC-J690DWのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J690DW 28 ページ。 Brief explanations for routine operations
Brother MFC-J690DW にも：マニュアル (22 ページ), 製品安全マニュアル (21 ページ)

ページを印刷する

Error Message

Data Remaining in

Memory

Disconnected

Document Jam/too

Long

DR Mode in Use

High Temperature

Hub is Unusable.

Ink Absorber

NearFull

Ink Absorber Pad

Full

Ink Low

Action

Press

. The machine will cancel the job and clear it from the

memory. Try to print again.

Try to send or receive again.

If calls are stopped repeatedly and you are using a VoIP (Voice over

IP) system, try changing the Compatibility to Basic (for VoIP).

See Related Information: Telephone Line Interference/VoIP at the end

of this section.

The document was not inserted or fed correctly, or the document

scanned from the ADF was too long.

For more detailed information, see the Online User's Guide: Document

Jams.

The machine is in Distinctive Ring mode. You cannot change the

Receive Mode from Manual to another mode.

Set Distinctive Ring to Off.

For more detailed information, see the Online User's Guide: Turn off

Distinctive Ring.

After cooling the room, allow the machine to cool down to room

temperature. Try again when the machine has cooled down.

Hubs, including a USB flash drive with a built-in hub, are not

supported. Unplug the device from the USB direct interface.

The ink absorber box must be replaced soon. Call Brother Customer

Service or a Brother Authorized Service Center to have your machine

serviced.

• The ink absorber box absorbs the small amount of ink emitted

during print head cleaning.

The ink absorber box must be replaced. Call Brother Customer Service

or a Brother Authorized Service Center to have your machine serviced.

One or more of the ink cartridges are near the end of their lives.

Order a new ink cartridge. You can continue printing until the

touchscreen displays Replace Ink.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

• You can still scan even if the ink is low or needs to be replaced.