- ページ 20

オール・イン・ワン・プリンター Brother MFC-J6920DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J6920DW 31 ページ。 Brother all in one printer
Brother MFC-J6920DW にも：安全マニュアル (21 ページ), 製品安全マニュアル (20 ページ), クイック・セットアップ・マニュアル (45 ページ), 製品安全マニュアル (25 ページ), 安全マニュアル (20 ページ)

For Wireless Network Users

For wireless network interface users

NOTE

If you have previously configured the wireless settings of the machine, you must reset the network settings

before you can configure the wireless settings again.

On your machine, press

Press Network.

Swipe up or down, or press a or b to display Network Reset. Press Network Reset.

Press Yes to accept. Hold down Yes for 2 seconds to confirm.

NOTE

To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access

point/router), see instructions in the Software and Network User's Guide on the CD-ROM.

To view the Software and Network User's Guide:

1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click User's Guides, and then click PDF/HTML documents.

4 Click Software and Network User's Guide.

For Macintosh:

2 Double-click User's Guides. Choose your model and the language.

3 Click User's Guides, and then click Software and Network User's Guide.

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother machine on a wireless network.

Choose the method you prefer for your environment.

Method a is the recommended way to connect (Windows

Setup using the CD-ROM (Windows

• We recommend using a computer wirelessly connected to your network for this method.

• A USB cable might be needed in some cases.

Now go to

. Press All Settings.

and Macintosh)

or Macintosh).

page 22