ページを印刷する
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the cookware,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth). When you hear
the acoustic signal, the hob deactivates.
Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
• you do not deactivate a cooking zone or
change the heat setting. After some time,
the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9
5.3 Using the cooking zone
CAUTION!
Do not place hot cookware on
the control panel. There is a risk
of damage to the electronic
parts.
10
ENGLISH
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hours
Place the cookware in the centre of the
selected zone.
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically.
When you place the cookware in the correct
position, the hob recognizes it and the
appropriate control bar comes on. A red
cooking zone indicator appears above the
control bar and indicates the position of the
pot.
Each square on the control panel represents
one cooking zone on the induction cooking
surface. Zone indicators show which cooking
zone is controlled by the appropriate control
bar.
5.4 Heat setting
1. Press the desired heat setting on the
control bar. You can also move your
finger along the control bar to set or
change the heat setting for a cooking
zone.
2. To deactivate a cooking zone, press 0.
Once you place a pot on the cooking zone
and set the heat setting, it remains the same
for 2 minutes after you remove the pot. The
control bar and the cooking zone indicator
blink for 2 minutes. If you place the pot on
the cooking zone again within this time, the
heat setting reactivates. Otherwise the
cooking zone deactivates.