- ページ 6

オール・イン・ワン・プリンター Brother MFC-L2740DWのPDF 詰め替え方法をオンラインで閲覧またはダウンロードできます。Brother MFC-L2740DW 8 ページ。 Brother mfps & printers product safety guide
Brother MFC-L2740DW にも：製品安全マニュアル (23 ページ), 製品安全マニュアル (26 ページ), クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ), ドラムユニットの交換方法 (12 ページ), 製品安全マニュアル (25 ページ), 基本マニュアル (20 ページ)

ページを印刷する

http://www.urefilltoner.co.uk/

Use and safety of the melting tool

any harm, but be aware that it's there and retire the cartridge if it shows signs of

physically jamming.

Important safety information

 To be used only by a competent, risk-aware adult.

 Use only in a well-ventilated situation. As with the combustion of any organic

substance (such as petrol or tobacco) a cocktail of gases can be produced and some of

of the tool to dip.

 Take care not to melt through the tool's own electric cable.

 Do not use the tool with the end-piece or blank filler tip removed.

 Turn off and unplug the tool as soon as you've melted your hole. Leave to cool at least 2 metres away from

your toner pouring area.

 Do not leave on for more than 30 minutes at a time.

 After use, allow the tool to cool down naturally. Do not immerse in water.

 Take all precautions for the use of a powered hand tool. Use eye and hand protection.

Assumption of risk notice

We ourselves have no hesitation in researching and refilling cartridges using the melting technique in a well-

ventilated room. However, the company gives no warranties, neither explicit nor implicit, as to the safety of

melting holes in toner cartridges or the use of the melting tool. Any activity or process has an element of risk.

The onus is on you, the purchaser, to assess any possible risk, including the inaccuracy or incompleteness of

currently available information. If you decide not to go ahead, return the product to us and we'll cheerfully

refund your money. This offer is additional to your statutory rights.

©® Ownership of all intellectual property relating to the melting tool has been asserted and secured.

Safety Data Brother HL-L2300D type toner

Only to be used by a competent risk-aware adult. Not to be used by children.

Avoid inhalation of product. Avoid eye and skin contact. Do not ingest. Avoid sources of ignition

while pouring and at all times.

1 Identification of the substance and the company

Product name

Brother HL-L2300 type refill toner

Part no.

BR2300BOT

Supplier

U Refill Toner Ltd. Contact details as per page header

2 Hazards identification

Classification

Not believed to be classified as hazardous according to OSHA CFR 1910.1200 or EU Directive 1999/45/EC, as

amended.

Acute health effects

Skin contact

Unlikely to cause skin irritation

Eye contact

May cause irritation

Inhalation

Irritation to respiratory tract if exposed to large amounts of toner dust

Ingestion

Unlikely when used as intended. Acute oral toxicity is believed to be low

Potential health effects

Routes of exposure

Skin contact, eye contact and inhalation. Ingestion unlikely.

Chronic health effects

Prolonged inhalation of excessive amounts of any dust may cause lung damage

Carcinogenicity

Carbon black is classified by IARC as group 2B (possible human carcinogen). Carbon black in this preparation,

due it its bound form, is not believed to present this risk.

Polypropylene (9003-07-0) is classified by IARC as group 3

facebook.com/urefilltoner

Original and largest selling do-it-yourself toner refill

The tool needs at least 5 minutes to reach an efficient melting

temperature.

To melt a hole, apply a light force similar to pressing on paper

with a ballpoint pen. Ease off the pressure as the tool sinks

into the plastic.

During the first 6 minutes of the first ever use, smoke will

come out of the heated part of the tool as manufacturing

lubricants burn off. This is normal.

Use a screwdriver to push out the residual plastic plug while

the tool is still hot.

Occasionally,

the

plastic

inside the cartridge. Try and get it out

using tweezers or pliers if you can. A

piece of plastic this size inside the

toner compartment doesn't usually do

these are harmful or at least irritant.

 All

metal

parts

dangerously hot. Never touch any metal part of the tool,

including the steel shaft near the plastic handle.

 When not in hand, the tool is designed to be rested at an

angle created by the flange of the handle, keeping the hot

parts suspended above your surface. But take care that the

power cable doesn't force the handle to rise and the hot end

youtube.com/user/urefilltonerUK

Page 6

plug

falls

urefilltoner.co.uk

the

tool

get