- ページ 2
オール・イン・ワン・プリンター Brother MFC490CW - Color Inkjet - All-in-OneのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC490CW - Color Inkjet - All-in-One 47 ページ。 Mac network connection
Brother MFC490CW - Color Inkjet - All-in-One にも： クイック・セットアップ・マニュアル (48 ページ), セットアップとインストール (5 ページ), 接続マニュアル (6 ページ), 修理指示 (2 ページ)
ページを印刷する
Note
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• For a network connection you will need to
purchase a network interface cable. Please use
the supplied USB cable for a USB connection.
• To ensure safe operation the supplied plug
must be inserted only into a standard power
outlet that is properly grounded through the
standard electrical wiring. Non grounded
equipment may cause an electrical shock
hazard, and may cause excessive electrical
noise radiation.
USB cable
Please make sure you use a USB 2.0 cable
(Type A/B) that is no more than 2 metres long.
Network cable
Use a straight-through Category5 (or greater) twisted-
pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
2
Load plain A4 paper
a
Pull the paper tray
machine.
b
Open the paper tray cover a.
1
2
completely out of the
a
1
c
With both hands, gently press and slide the
paper side guides
guide
to fit the paper size.
b
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
Important
Do not push the paper in too far.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
b