- ページ 31
オール・イン・ワン・プリンター Brother Work Smart MFC-J650dwのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Brother Work Smart MFC-J650dw 45 ページ。 Work smart series inkjet all-in-one
Brother Work Smart MFC-J650dw にも： エア・プリント・マニュアル (12 ページ), スペック (2 ページ), 基本マニュアル (14 ページ), よくある質問とトラブルシューティング (6 ページ)
ページを印刷する
For Wireless Network Users
Manual setup from the
16
control panel using the
Setup Wizard
Macintosh and mobile devices)
a
Press
.
Press Setup Wizard.
When Enable WLAN? or Switch Network
interface to wireless? is displayed,
press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
b
The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, press a or b to
choose the SSID you wrote down in step 15-b
on page 28.
Press OK.
If the wireless access point/router of the
selected SSID supports WPS, and the machine
asks to use WPS, go to c.
If the machine asks you to enter a Network
Key, go to d.
Otherwise, go to e.
NOTE
• If the list is blank, check that the wireless
access point/router has power and is
broadcasting the SSID. Move your machine
closer to the wireless access point/router and
try starting from a again.
• If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For details, see the Software and
Network User's Guide.
c
Press Yes to connect your machine using
WPS. (If you choose No (Manual) to
continue manual configuration, go to d to enter
a Network Key.)
When the Touchscreen instructs you to start
WPS, press the WPS button on your wireless
access point/router, and then press Next to
proceed.
Go to e.
d
®
(Windows
,
NOTE
e
NOTE
To install MFL-Pro Suite, continue to
step 17.
For Windows
Page 35
For Macintosh users:
Page 38
Enter the Network Key you wrote down in
step 15-b on page 28 using the Touchscreen.
Press
to cycle between lower case and
upper case. Press
letters, numbers and special characters. (The
characters available may differ depending on
your country.) To move the cursor to the left or
right, press d or c.
(For details, see Entering Text for Wireless
Settings on page 42.)
Press OK when you have entered all the
characters, then press Yes to apply your
settings.
Your machine will now try to connect to your
wireless network. It may take a few minutes.
Wireless setup is now complete.
The Wi-Fi LED
lights up, indicating that the machine's
Network I/F is set to WLAN.
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows
mobile device's application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User's Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
http://solutions.brother.com/ and click Manuals
on your model's page.
®
users:
Now go to
Now go to
to cycle between
on the control panel
®
Phone) from your
31