- ページ 17

ホブ AEG 65852 GのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 65852 G 32 ページ。 Electrolux gas hobs instruction booklet
AEG 65852 G にも：パンフレット＆スペック (12 ページ), 取扱説明書 (32 ページ)

ページを印刷する

On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that

the washer is fitted between the components as shown in the diagram. Screw the parts together

without using excessive force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper.

The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).

When the final connection has been made, it is essential that a thorough leak test is carried out

on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the end of the

thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

FO 0814