- ページ 18
ホブ AEG 66030K-MNのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 66030K-MN 28 ページ。 Ceramic glass hob
ページを印刷する
What to do if ...
The cooking zones will not
switch on or are not func-
tioning
Acoustic signal sounds
when appliance is switched
off
The residual heat indicator
is not displaying anything
The automatic warm up
function is not switching
itself on
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic
signal sounds
18
Problem
More than 10 seconds have
passed since the appliance
was switched on
The child safety device is
switched on
Several sensor fields were
touched at the same time
Safety cut-out has been
triggered
The lock is switched on l
The control panel is wholly
or partly covered by ob-
jects.
The cooking zone was only
on for a short time and is
therefore not hot
There is still residual heat
on the cooking zone h
The highest heat setting is
set Ç
The heat setting was set
using the sensor field -
The On/Off sensor field has
been covered up, e.g. by a
cloth
Possible cause
l
Remedy
Switch the appliance on
again.
Deactivate the child safety
device (See the section
"Child safety device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
Switch off the lock (See
the section "Locking/un-
locking the control panel")
Remove objects.
If the cooking zone is sup-
posed to be hot, call the
Customer Service Depart-
ment.
Let the cooking zone cool
down
The highest heat setting
has the same power as the
automatic warm up func-
tion
1. Switching off the cook-
ing zone
2 . Set the cooking zone us-
ing the sensor field +
Do not place any objects
on the control panel