- ページ 36

プリンター Brother Business Smart MFC-J4510dwのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother Business Smart MFC-J4510dw 47 ページ。 Quick setup guide - spanish
Brother Business Smart MFC-J4510dw にも：マニュアル (36 ページ), マニュアル (22 ページ), 製品安全マニュアル (17 ページ), マニュアル (13 ページ), マニュアル (22 ページ), クイック・セットアップ・マニュアル (47 ページ), マニュアル (18 ページ), クイック・セットアップ・マニュアル (47 ページ), パンフレット＆スペック (4 ページ), 製品安全マニュアル (20 ページ), 仕様 (2 ページ), クイック・スタート・マニュアル (29 ページ), 製品安全マニュアル (25 ページ), (スペイン語）ウェブ・コネクト・マニュアル (38 ページ), (スペイン語）マニュアル (24 ページ), (製品安全ガイドマニュアル (16 ページ), (スペイン語）マニュアル (11 ページ), (クイック設定ガイド (47 ページ)

For Wireless Network Users

Troubleshooting

Please do not contact Brother Customer Service for assistance without the wireless security

information. We cannot assist you in locating your network security settings.

How can I find the wireless security information (SSID and Network Key)

1) You should see the documentation provided with your wireless access point/router.

2) The initial SSID could be the manufacturer's name or the model name.

3) If you do not know the security information, please consult the router manufacturer, your system

administrator or internet provider.

* The Network Key may also be described as the Password, Security Key or Encryption Key.

Wireless LAN report

If the wireless LAN report that printed shows that the connection failed, check the error code on the printed report

and refer to the following instructions.

Error code

TS-01

TS-02

The wireless setting is not activated, turn the wireless setting to ON.

- If a network cable is connected to your machine, disconnect it and turn the wireless setting

of your machine to ON.

On your machine, press

Press Network.

Swipe up or down, or press a or b to display Network I/F, and then press Network I/F.

Press WLAN.

Press

The wireless access point/router cannot be detected.

1. Check the following 4 points.

- Make sure that the wireless access point/router is powered on.

- Move your machine to an obstruction-free area, or closer to the wireless access

point/router.

- Temporarily place your machine within about one metre from the wireless access point

when you are configuring the wireless settings.

- If your wireless access point/router is using MAC address filtering, confirm the MAC

address of the Brother machine is allowed in the filter.

2. If you manually entered the SSID and security information (SSID/authentication

method/encryption method/Network Key), the information may be incorrect.

Reconfirm the SSID and security information and re-enter the correct information as

necessary.

See How can I find the wireless security information (SSID and Network Key) on page 36 to

confirm.