- ページ 10

プリンター Brother DCP-377CWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-377CW 39 ページ。 Inkjet dcp/mfc
Brother DCP-377CW にも：部品リファレンスリスト (32 ページ), クイック・セットアップ・マニュアル (29 ページ)

ページを印刷する

USB

Connect the USB cable

IMPORTANT

• DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub.

• Connect the machine directly to your

computer.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Connect the USB cable to the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

LAN

USB

symbol. You will find the

Carefully guide the USB cable through the

trench as shown below, following the trench

around and toward the back of the machine.

Then connect the cable to your computer.

IMPORTANT

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock a.

Gently push the scanner cover support

down

and close the scanner cover c.

The installation will continue automatically.

The installation screens appear one after

another.

IMPORTANT

DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

When the On-Line Registration screen is

displayed, make your selection and follow the

on-screen instructions.

Windows