- ページ 23
プリンター Brother DCP-7060DのPDF 上級ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-7060D 33 ページ。 Printers
Brother DCP-7060D にも： クイック・セットアップ・マニュアル (20 ページ), クイック・セットアップ・マニュアル (20 ページ), 上級ユーザーマニュアル (24 ページ), クイック・セットアップ・マニュアル (15 ページ), 基本マニュアル (5 ページ)
ページを印刷する
• If the machine receives a print job before
you put the sheet of paper in the manual
feed slot, the machine will finish the Drum
Cleaning process first, and then print the
print job.
h
When the machine has finished
cleaning, the machine returns to Ready
mode.
i
Repeat steps e to h two more times
using a new blank sheet of paper each
time. Upon completion please discard
the used paper.
If the problem is not solved yet, follow the
steps below.
a
Open the front cover and leave the
machine turned on for 10 minutes to
cool down.
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front or
back cover (back output tray) of the
machine, DO NOT touch the shaded parts
shown in the illustration. If you do this, you
may get burned.
Routine maintenance
b
Slowly take out the drum unit and toner
cartridge assembly.
CAUTION
We recommend that you put the drum unit
and toner cartridge assembly on a clean,
flat surface with a sheet of disposable
paper or cloth underneath it in case you
accidentally spill or scatter toner.
A
19