- ページ 16
プリンター Brother DCP-9040CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-9040CN 30 ページ。 Facsimile equipment
Brother DCP-9040CN にも： パンフレット＆スペック (4 ページ), マニュアル (7 ページ), 部品リファレンスリスト (43 ページ), クイック・セットアップ・マニュアル (31 ページ), クリーニングとケア (7 ページ), クイック・スタート・マニュアル (10 ページ), クイック・セットアップ・マニュアル (20 ページ)
ページを印刷する
STEP 2
Installing the Driver & Software
7
After reading and accepting the ScanSoft™
PaperPort™ 11SE License Agreement,
click Yes.
The installation of ScanSoft™ PaperPort™
11SE will automatically start and is followed by
the installation of MFL-Pro Suite.
8
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
9
Choose Network Connection, and then click
Next.
Note
If you want to install the PS driver (Brother's
BR-Script Driver), choose Custom Install and
then follow the on-screen instructions. When the
Select Features screen appears, check
PS Printer Driver, and then continue following the
on-screen instructions.
14
10
If the machine is configured for your network,
choose the machine from the list, and then click
Next. This window will not appear if there is
only one machine connected on the network, it
will be chosen automatically.
If your machine shows APIPA in the IP
Address field, click Configure IP Address
and enter an IP address for your machine that
is suitable for your network.
Note
If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address window will appear.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
11
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
Note
For Windows Vista™, when this screen appears,
click the check box and click Install.
®
Windows