- ページ 38
プリンター Brother DCP-J100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J100 48 ページ。 Color multi-function printer
Brother DCP-J100 にも： 上級ユーザーマニュアル (44 ページ), クイック・スタート・マニュアル (25 ページ), 製品安全マニュアル (18 ページ)
ページを印刷する
Checking the ink volume
You can check the ink that is left in the
cartridge.
(MFC-J200)
a
Press Menu, 1, 3.
b
The LCD displays the ink volume.
c
Press a or b to choose the color you
want to check.
d
Press Stop/Exit.
(DCP-J100 and DCP-J105)
a
Press Menu.
b
Press a or b to choose 1.Ink.
Press OK.
c
Press a or b to choose 3.Ink Volume.
Press OK.
The LCD shows the ink volume.
BK:-ooooonn+
d
Press a or b to choose the color you
want to check.
e
Press Stop/Exit.
NOTE
You can check the ink volume from your
computer.
For more information, see Software and
Network User's Guide: Monitor the Ink
Level and Status of the Machine from
Your Computer (Windows
the Ink Level and Status of the Machine
from Your Computer (Macintosh).
34
A
A
A
e
®
) or Monitor
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
correctly, any damage that may occur in
transit may not be covered by your warranty.
The machine should be adequately insured
with the carrier.
IMPORTANT
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noises have stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Unplug the machine from the AC power
outlet.
b
Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
Then unplug the machine from the
telephone wall jack and take the
telephone line cord out of the machine.
c
Unplug the interface cable from the
machine, if it is connected.
A