- ページ 20
プリンター Brother DCP-J105のPDF 上級ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J105 44 ページ。 Color multi-function printer
Brother DCP-J105 にも： クイック・スタート・マニュアル (25 ページ), ユーザーマニュアル (48 ページ), 製品安全マニュアル (18 ページ)
ページを印刷する
Dialling and storing numbers
5
(MFC models only)
Additional dialling
operations
Combining Speed Dial
numbers
Sometimes, you may want to choose from
several long-distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Speed Dial numbers. (See Basic User's
Guide: Storing Speed Dial numbers.)
You can store these long dialling sequences
by dividing them and setting them up as
separate Speed Dial numbers in any
combination.
You can even include manual dialling using
the dial pad.
For example, you might have stored '01632'
on Address Book: #03 and '960555' on
Address Book: #02. You can use them both to
dial '01632-960555' as shown in the following
example:
a
Press
(FAX).
b
Press
(Address Book).
c
Press a or b to choose Search.
Press OK.
d
Enter #, 03.
e
Press
(Address Book).
f
Enter #, 02.
g
Press Mono Start or Colour Start.
You will dial '01632-960555'.
16
To temporarily change a number, you can
use the dial pad to manually substitute part of
the number. For example, to change the
5
number to '01632-960556', you could enter
the number (#03 '01632') using
(Address Book), choose Search,
press OK, press #, 03, and then press
5
'960556' using the dial pad.
NOTE
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Redial/Pause. Each key
press adds a 3.5 (2.5 for South Africa)
second delay. You can press
Redial/Pause as many times as needed
to increase the length of the pause.
5