- ページ 18
プリンター Brother DCP-J1100DWのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J1100DW 31 ページ。
Brother DCP-J1100DW にも： クイック・セットアップ・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), リファレンス・マニュアル (31 ページ), 製品安全マニュアル (18 ページ), クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ)
ページを印刷する
A
Routine Maintenance
Check the Print Quality
If faded or streaked colours and text appear or
if text is missing on your printouts, the print
head nozzles may be clogged. Print the Print
Quality Check Sheet and look at the nozzle
check pattern.
1
Press
[Settings] >
[Maintenance] > [Improve Print
Quality] > [Check Print
Quality].
2
Press [Start].
The machine prints the Print Quality
Check Sheet.
3
Check the quality of the four colour
blocks on the sheet.
4
The touchscreen asks about the print
quality. Do one of the following:
• If all lines are clear and visible, press
[No], and then press
the Print Quality check.
• If lines are missing (see Poor, as
follows), press [Yes].
OK
Poor
5
The touchscreen asks you to check the
print quality of each colour. Press the
number of the pattern (1–4) that most
closely matches the printing result.
6
Do one of the following:
• If print head cleaning is needed,
• If print head cleaning is not needed,
7
After the cleaning procedure is finished,
the touchscreen asks if you want to print
the Print Quality Check Sheet again.
Press [Yes], and then press [Start].
The machine prints the Print Quality
Check Sheet again. Check the quality of
the four colour blocks on the sheet
again.
If you clean the print head and the print has
not improved, try installing a Brother Original
replacement ink cartridge for each problem
to finish
colour. Try cleaning the print head again. If
the print has not improved, contact Brother
customer service or your local Brother dealer.
IMPORTANT
DO NOT touch the print head. Touching the
print head may cause permanent damage and
may void the print head's warranty.
press [Start] to start the cleaning
procedure.
the Maintenance screen reappears
on the touchscreen. Press
.
17