- ページ 2
プリンター Brother DCP-J140WのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J140W 21 ページ。 Advanced users manual spainish - english and spanish
Brother DCP-J140W にも： クイック・セットアップ・マニュアル (33 ページ), 上級ユーザーマニュアル (22 ページ), 製品安全マニュアル (16 ページ), 上級ユーザーマニュアル (21 ページ), (クイック設定ガイド (32 ページ), (アドバンス・ユーザー・ガイド (23 ページ)
ページを印刷する
2
Attachment of the cover
of the control panel
a
Attach the cover of the control panel to the
machine.
3
Load plain A4 paper
a
Pull the paper tray completely out of the
machine.
b
Open the output paper tray cover.
c
With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
2
1
3
2
3
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
Note
Always make sure that the paper is not curled or
wrinkled.
e
Check that the paper is flat in the tray.
Important
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
f
Gently adjust the paper side guides to the
paper with both hands.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.