- ページ 16

プリンター Brother DCP-J562DWのPDF 製品安全マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J562DW 25 ページ。
Brother DCP-J562DW にも：ユーザーマニュアル (22 ページ)

8 Unplug this product from the wall outlet before cleaning the outside of the product. Do not use

liquid or aerosol cleaners. Use a damp cloth for cleaning.

9 Never push objects of any kind into this product through cabinet slots, since they may touch

dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never

spill liquid of any kind on the product.

10 Do not place anything on top of the power cord including this product. Do not allow the power

cord to be stepped on.

11 Do not place this product on an unstable surface, stand, or table. The product may fall, causing

serious damage to the product.

12 Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure

reliable operation of the product and to protect it from overheating, these openings must not

be blocked or covered. The openings should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should never be placed near or over a radiator

or heater. This product should not be placed in a built-in installation unless proper ventilation

is provided.

13 Do not place anything in front of the product that will block printouts. Do not place anything in

the path of received faxes.

14 Do not touch a document during printing.

15 Not all telephones will respond to incoming ringing when connected to the extension socket.

MFC only

1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has

accepted that the item complies with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.

Above all, it provides no assurance that any item will work correctly in all respects with another

item of Telepermitted equipment of a different make or model, nor does it imply that any

product is compatible with all of Telecom's network services.

2 This equipment does not fully meet Telecom's impedance requirements. Performance

limitations may occur when used in conjunction with some parts of the network. Telecom will

accept no responsibility should difficulties arise in such circumstances.

3 This equipment should not be used under any circumstances which may constitute a nuisance

to other Telecom customers.

4 This equipment shall not be set up to make automatic calls to the Telecom "111" Emergency

Service.

5 This equipment is not capable, under all operating conditions, of correct operation at the higher

speeds for which it is designed. Telecom will accept no responsibility should difficulties arise

in such circumstances.

6 Some parameters required for compliance with Telecom's Telepermit requirements are

dependent on the equipment (PC) associated with this device. The associated equipment shall

be set to operate within the following limits for compliance with Telecom's Specifications:



There shall be no more than 10 call attempts to the same number within any 30 minute

period for any single manual call initiation.