- ページ 4

プリンター Brother DCP-J572DWのPDF 製品安全マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J572DW 21 ページ。 Brief explanations for routine operations
Brother DCP-J572DW にも：リファレンス・マニュアル (34 ページ), クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ), リファレンス・マニュアル (32 ページ), マニュアル (19 ページ), クイック・セットアップ・マニュアル (2 ページ)

CAUTION

Put your product on a flat, level, stable surface (such as a desk), that is free from vibration

and shocks. Put the product near a telephone socket (MFC models only) and a standard

grounded electrical socket or a standard electrical socket (for Taiwan).

DO NOT place this product on an unstable cart, stand, or table, particularly if children are

expected to be near the product. The product is heavy and may fall, causing injury to you or

others and serious damage to the product. For the products with scanning functionality, there

is an added risk of injury if the scanner glass should break.

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product.

Ensure that cables and cords leading to the product are secured so as not to pose a tripping

hazard.

DO NOT place heavy objects on the product.

DO NOT place any objects around the product. Such objects block the access to the electrical

socket in case of emergency. It is important that the product can be unplugged whenever

needed.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic

fields. Doing so may interfere with the operation of the product, causing print quality

problems.

• DO NOT place the product on any tilted/slanted surface. DO NOT tip the product after ink

cartridges are installed. Doing so may cause ink spillage and internal damage to the

product.

• DO NOT place your product next to sources of interference, such as speakers or the base

units of non-Brother cordless telephones. Doing so may interfere with the operation of the

product's electronic components.

• DO NOT place anything in front of the product that will block printed pages or received faxes

(MFC models only). DO NOT place anything in the path of printed pages or received faxes

(MFC models only).