- ページ 21

プリンター Brother DCP-J725DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J725DW 32 ページ。 Network glossary - spanish
Brother DCP-J725DW にも：マニュアル (21 ページ), (スペイン語）マニュアル (21 ページ)

ページを印刷する

For Wireless Network Users

One-push configuration

using WPS or AOSS™

(Windows

Macintosh)

Confirm your wireless access point/router has

the WPS or AOSS™ symbol as shown below.

Place the Brother machine within range of your

WPS or AOSS™ access point/router. The

range may differ depending on your

environment. Refer to the instructions provided

with your access point/router.

On your machine, press Menu.

Press s or t to display Network.

Press Network.

Press s or t to display WPS/AOSS.

Press WPS/AOSS.

When Enable WLAN? is displayed, press Yes

to accept.

This will start the wireless setup wizard.

To cancel, press No.

Note

If your wireless access point/router supports WPS

(PIN Method), you can also configure your

machine using the PIN (Personal Identification

Number) Method. uuNetwork User's Guide:

Configuration using the PIN Method of Wi-Fi

Protected Setup

When the LCD shows Start WPS or AOSS,

press the WPS or AOSS™ button on your

wireless access point/router. See the user's

guide of your wireless access point/router for

instructions.

Then press OK and your machine will now

automatically detect which mode (WPS or

AOSS™) your wireless access point/router

uses and try to connect to your wireless

network.

and

A connection result message appears for

60 seconds on the LCD and a wireless LAN

report will automatically be printed.

If the connection failed, check the error code on

the printed report and refer to Troubleshooting

on page 22.

Wireless setup is now complete. A four

level indicator is shown at the top of the

LCD which displays the wireless signal

strength of your access point/router.

To install MFL-Pro Suite, continue to

step 13.

For Windows

Users:

Now go to

Page 24

For Macintosh Users:

Now go to

Page 27