- ページ 11
ホブ AEG 949 597 382 00のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 949 597 382 00 24 ページ。
ページを印刷する
5.4 The heat setting
Touch the control bar at the desired heat
setting or move your finger along the
control bar to set or change the heat
setting for a cooking zone.
Once you place a pot on the zone and
set the heat setting it remains the same
for 2 minutes after you remove the pot.
The control bar and the cooking zone
indicator blink for 2 minutes. If you place
the pot on the cooking zone again within
this time the heat setting reactivates,
otherwise, the cooking zone deactivates.
5.5 Bridge function
This function connects two cooking
zones and they operate as one. You can
use the function with large cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
turns white.
2. Press
to activate the function.
3. Set the heat setting.
The cookware must cover the centres of
both zones but not go beyond the area
marking.
To deactivate the function, touch
cooking zones operate independently.
5.6 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
and it depends on the cookware size.
The function can be activated only for a
limited period of time.
Touch
to activate the function for the
cooking zone.
The symbol turns red.
The function deactivates automatically.
For maximum duration
values, refer to "Technical
data".
5.7 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
Set the heat setting for the appropriate
cooking zone and then set the function.
1. Touch
to activate the function or
change the time.
The timer digits 00 and the indicators
and
come on the display.
red, and
turns white.
If the timer is not set, all indicators
disappear after 4 seconds.
2. Touch
or
99 minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
, and
disappear.
When the time comes to an end, a signal
sounds and 00 flashes. To stop the
signal, touch
.
To deactivate the function: touch
indicators
and
to set 00 on the display. Alternatively,
set the heat level to 0. As a result, a
signal sounds and the timer is cancelled.
ENGLISH
11
. The
turns
to set the time (00 -
,
stays red.
. The
come on. Use
or