プリンター Brother DCP-L2532DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-L2532DW 2 ページ。 Brief explanations for routine operations
Brother DCP-L2532DW にも：リファレンス・マニュアル (23 ページ), リファレンス・マニュアル (24 ページ), クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ)

ページを印刷する

MFC-L2712DW / MFC-L2712DN / MFC-L2710DW / MFC-L2710DN /

DCP-L2552DN / DCP-L2550DN / DCP-L2537DW / DCP-L2532DW /

DCP-L2530DW / DCP-L2512D / DCP-L2510D

Quick Setup Guide

Unpack the machine and check the components

Drum Unit and Inbox Toner Cartridge

Watch our Video FAQs for

help with setting up your

Brother machine:

support.brother.com/videos.

Remove the packing materials and install the drum unit and toner cartridge assembly

Load paper in the paper tray

Connect the power cord and turn the machine on

Back

Select your language (if needed)

(for DCP models)

a. Press Menu.

b. Press ▲ or ▼ to display [Initial Setup], and then press OK.

c. Press ▲ or ▼ to display [Local Language], and then press OK.

(for MFC models) Press Menu, 0, 0.

Press ▲ or ▼ to select your language, and then press OK.

Press Stop/Exit.

(For U.K.)

(For Others)

Telephone Line Cord

(For MFC models)

Brother Installation Disc

Adjust the paper

Front

Read the Product Safety Guide first, then read this Quick

Setup Guide for the correct installation procedure.

Not all models are available in all countries.

The latest manuals are available at the Brother Solutions

Center: support.brother.com/manuals.

AC Power Cord

(only for certain models)

Quick Setup Guide

Product Safety Guide

Remove the orange part.

Do not exceed this mark.

guides.

Select your country/language

(Initial setup only)

After turning the machine on, you may be required to set your country

or language (depending on your machine).

If required, follow the on-screen instructions.

NOTE:

• The components included in the box may differ depending on your country.

• The available connection interfaces vary depending on the model.

• Interface cables are not included. You must purchase the correct interface cable if

you require one.

USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more than

2 metres long.

Network cable

Use a straight-through Category 5 (or greater) twisted-pair cable.

• The illustrations in this Quick Setup Guide show the MFC-L2710DW.

Secure Network Access

Your machine's default password is on the label on the back of the

machine (preceded by "Pwd").

We strongly recommend you change it to protect your machine

from unauthorised access.

Push firmly.

D01H7V001-00

Version B