- ページ 5

ホブ AEG 949 597 894 00のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 949 597 894 00 28 ページ。

ページを印刷する

• When the appliance operates with other appliances the

maximum vacuum generated in the room should not exceed

0.04 mbar.

• Clean the hood filter regularly and remove grease deposits

from the appliance to prevent the risk of fire.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• If the appliance is connected directly to the power supply,

the electrical installation must be equipped with an isolating

device that allows to disconnect the appliance from the

mains at all poles. Complete disconnection must comply

with conditions specified in the overvoltage category III. The

means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must install this

appliance.

WARNING!

Risk of injury or damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions supplied

with the appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Seal the cut surfaces of the cabinet with a

sealant to prevent moisture from causing

swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance next to a door

or under a window. This prevents hot

cookware from falling from the appliance

when the door or the window is opened.

• Do not install in a manner that exhausts

air into a wall cavity, unless the cavity is

designed for that purpose.

• For ductless installation, the fan outlet

must be positioned directly against the

wall or must be separated by an additional

cabinet wall, in order to prevent access to

the fan blades.

• Each appliance has cooling fans on the

bottom.

ENGLISH