- ページ 13

プリンター Brother DCP-L2640DWのPDF 製品安全マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-L2640DW 19 ページ。
Brother DCP-L2640DW にも：クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ), 製品安全マニュアル (22 ページ), クイック・セットアップ・マニュアル (2 ページ), 製品安全マニュアル (22 ページ), クイック・セットアップ・マニュアル (2 ページ), 製品安全マニュアル (19 ページ)

declare that these products are in conformity with the provisions of the RE Directive

2014/53/EU. A copy of the Declaration of Conformity can be downloaded by following the

instructions in the Declaration of Conformity (Europe Only) section.

IEC 60825-1:2014 (For 220-240V Models Only)

This product is a Class 1 laser product as defined in the IEC 60825-1:2014 standard.

The label shown below is attached in countries where required.

IEC 60825-1:2014 (For 220-240V Models Only)

EN 60825-1:2014+A11:2021 (Europe Only)

This product has a Class 3B laser diode which emits invisible laser radiation in the laser unit.

The laser unit must not be opened under any circumstances.

Internal laser radiation

Wavelength: 775 nm - 800 nm

Output: 25 mW max.

Laser class: Class 3B

WARNING

Use of controls, adjustments or performance of procedures other than those specified in this

manual may result in hazardous radiation exposure.

NFC (Models with the NFC Function Only)

This Printer/Multifunction Printer supports NFC (Near Field Communication).

• (MFC-L2886DW/MFC-L2885DW/MFC-L2920DW)

Frequency band(s): 13.553 MHz - 13.567 MHz

Maximum radio-frequency power transmitted in the frequency band(s): Less than 111.5

dBuV/m at 10 m

LAN Connection (Models with the Wired LAN Function Only)

CAUTION

DO NOT connect this product to a LAN connection that is subject to over-voltages.