- ページ 4

プリンター Brother DCP-T428WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-T428W 4 ページ。
Brother DCP-T428W にも：クイック・スタート・マニュアル (4 ページ), ユーザーマニュアル (23 ページ)

ページを印刷する

2 in 1 ID Copy

(DCP-T220 / DCP-T226 / DCP-T420W / DCP-T425W / DCP-T426W)

Check Ink Volume

Improve Print Quality

Clean the print head.

(DCP-T428W: Upload)

Press simultaneously

If the print quality does not improve with normal cleaning, try the Special cleaning (Note that this operation will consume a large amount of ink).

1. Make sure all ink tanks are at least half-full.

2. Use the procedure above, but hold Mono Start and Color Start simultaneously for five seconds while the Ink LED is blinking.

Remove Jammed Paper

For FAQs, Troubleshooting, and to download software and manuals, visit www.95105369.com.

Place in the

lower right

DO NOT fill the ink tank past the maximum fill mark.

When the ink level reaches the lower line, refill the ink tank as soon as possible.

Clean all colors

Clean black only

Blinking

Blinks slowly after scanning is complete

You can set one specific copy function for the Copy

Shortcut button (see the Online User's Guide). The

default is 2 in 1 ID Copy.

After cleaning, the machine prints the Print

Quality Check Sheet.

Good

Avoid getting ink on your

hands.

Poor