- ページ 38

プリンター Brother DCP-T700WのPDF 上級ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-T700W 46 ページ。
Brother DCP-T700W にも：クイック・スタート・マニュアル (25 ページ), 上級ユーザーマニュアル (39 ページ), 上級ユーザーマニュアル (40 ページ)

Packing and shipping

the machine

When you transport the machine, use the

packing materials that came with your

machine. If you do not pack the machine

correctly, any damage that may occur in

transit may not be covered by your warranty.

The machine should be adequately insured

with the carrier.

IMPORTANT

It is important to allow the machine to

"park" the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noises have stopped. Not

allowing the machine to finish this parking

process may lead to print problems and

possible damage to the print head.

Unplug the machine from the AC power

outlet.

Place both hands under the plastic tabs

on both sides of the machine to lift the

scanner cover into the open position.

Then unplug the machine from the

telephone wall jack and take the

telephone line cord out of the machine.

Unplug the interface cable from the

machine, if it is connected.

Lift the scanner cover (1) to release the

lock. Gently push the scanner cover

support down (2) and close the scanner

cover (3) using both hands.

CAUTION

Be careful not to pinch your fingers when

you close the scanner cover.

Open the ink tank cover.

Make sure the cap of the ink tank is

installed correctly.

Push down to install the cap of the ink

tank tightly and then close the ink tank

cover.