- ページ 20
プリンター Brother DCP-T820DWのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-T820DW 23 ページ。
Brother DCP-T820DW にも: クイック・セットアップ・マニュアル (4 ページ), クイック・セットアップ・マニュアル (4 ページ), クイック・セットアップ・マニュアル (4 ページ), クイック・セットアップ・マニュアル (4 ページ), クイック・セットアップ・マニュアル (4 ページ), 製品安全マニュアル (18 ページ)
• Maximum power spectral density: ≤ 10 dBm / MHz (EIRP)
• Carrier frequency tolerance: 20 ppm
• Out-of-band emission power (Outside the 2.4 to 2.4835 GHz
frequency band)
≤ -80 dBm / Hz (EIRP)
• Spurious emission (radiation) power (Outside the range of the
corresponding carrier ± 2.5 times the channel bandwidth):
≤ -36 dBm / 100 kHz (30 - 1000 MHz)
≤ -33 dBm / 100 kHz (2.4 - 2.4835 GHz)
≤ -40 dBm / 1 MHz (3.4 - 3.53 GHz)
≤ -40 dBm / 1 MHz (5.725 - 5.85 GHz)
≤ -30 dBm / 1 MHz (1 - 12.75 GHz for others)
2. DO NOT, without appropriate permission, attempt to alter the emission
frequency or increase the emission power (including by installing an
additional RF power amplifier), or connect any external antenna or use
any unspecified transmitting antenna.
3. This equipment must not cause harmful interference to other radio
services. In case such interference occurred, the equipment must be
stopped immediately and cannot be used until the appropriate
measures are taken to eliminate the harmful interference.
4. This micro-power wireless equipment must accept any interference
caused by the legal operation of other radio services or radiated
interference received from the industrial, scientific and medical
appliances.
5. DO NOT use this equipment anywhere near the plane or airport.
LAN Connection (Models with Wired LAN
Function Only)
CAUTION
DO NOT connect this product to a LAN connection that is subject to
over-voltages.
20