- ページ 15

プリンター Brother DCP120C - Flatbed Multifunction Photo Capture CenterのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP120C - Flatbed Multifunction Photo Capture Center 24 ページ。 Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center にも：クイック・スタート・マニュアル (33 ページ), 部品リファレンスリスト (30 ページ), クイック・セットアップ・マニュアル (33 ページ), (フランス語) 迅速設置ガイド (24 ページ)

Installing the Driver & Software

The installation of PaperPort

automatically start and is followed by the

installation of MFL-Pro Suite.

When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes

if you agree to the Software License

Agreement.

Choose Local Connection, and then click

Next. The installation continues.

When this screen appears, go to the next step.

Open the scanner cover to its open position.

Connect the USB cable to the USB socket

marked with a

USB socket above and to the left of the ink

cartridge slots, as shown below.

9.0SE will

symbol. You will find the

Carefully route the USB cable through the

trench and out the back of the machine as

shown below.

Improper Setup

• DO NOT connect the machine to a USB port on

a key board or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Turn on the machine by plugging in the power

cord.

It will take a few seconds for the installation

screens to appear.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another. Please wait, it will

take a few seconds for all screens to

appear.

Improper Setup

DO NOT try to cancel any of the screens during

this installation.

Windows