- ページ 18
プリンター Brother DCP120C - Flatbed Multifunction Photo Capture CenterのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP120C - Flatbed Multifunction Photo Capture Center 24 ページ。 Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center にも： クイック・スタート・マニュアル (33 ページ), 部品リファレンスリスト (30 ページ), クイック・セットアップ・マニュアル (33 ページ), (フランス語) 迅速設置ガイド (24 ページ)
ページを印刷する
STEP2
Installing the Driver & Software
9
Connect the USB cable to the USB socket
marked with a
USB socket above and to the left of the ink
cartridge slots, as shown below.
10
Carefully route the USB cable through the
trench and out the back of the machine as
shown below.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
11
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
12
Turn on the machine by plugging in the power
cord.
16
symbol. You will find the
13
Choose USB and then click OK.
14
Click GO, then Applications.
15
Double-click the Utilities folder.
16
Double-click the Printer Setup Utility icon.
Note
®
For Mac
OS X 10.2.x users, open Print Center
icon.
17
Click Add.
®
Macintosh