- ページ 7

プリンター Brother GT-782のPDF パンフレット＆スペックをオンラインで閲覧またはダウンロードできます。Brother GT-782 9 ページ。 Dual platen white ink direct-to-garment printer
Brother GT-782 にも：ハウ・トゥ・ドゥ (12 ページ)

ページを印刷する

The most important parts to maintain properly in the GT-541 are the four

Print Heads. The printer performs a self-cleaning of the print heads when it

is powered on, and also after a specified amount of prints (Initial setting is

after 24 prints). This is done in order to maintain a high print quality. But to

help ensure a good quality print, the area surrounding the print heads will

have to be cleaned on a regular basis. Mist from the ink being sprayed may

cause dust and lint to build around maintenance unit parts, and cause poor

print quality. The Wiper Cleaner Cassette should be checked once a week

before turning on the printer and examined for excess liquid (ink) in the

white wiper cleaner, and for wear of the cleaner. The wiper blade should

be examined at this time as well.

The image above shows the checkpoints that should be part of a monthly

maintenance schedule. If the black ink is cartridge is changed more often

than every thirty days, the maintenance should be performed whenever

the black ink cartridge is changed.

PrINT & SeW

Monthly Check Points

Wiper Cleaner and Wiper Cleaner Cassette

It is very important that the "Wiper Cleaner" is able to absorb ink when

the wiper edge rubs against the cleaner during the wiper arm movement.

The wiper blade is cleaned as the surface of the wiper passes across the

cleaner. This action removes excess ink from the edge of the wiper blade.

This creates a clean wiper, and enables the wiper to clean surface of the

print head nozzles. The cleaner will eventually become oversaturated and

therefore be unable to clean the wiper. This will render the wiper unable

to clean the surface of the print head nozzles, and poor print quality will

result. The wiper cleaner should be examined weekly, and likely changed

monthly.

A new black ink cartridge box contains a cap/wiper cleaner kit. This kit

includes four swabs, a container of wash solution, a set of plastic gloves,

and a new wiper cleaner. The kit can be order through the PAS division

(877-850-7179). The cap/wiper cleaner kit part number is SA5774001.

Refer to the Maintenance section in the Basic Operation Manual or In-

struction Manual, located in the Brother GT Tools program on your com-

puter. The manual will provide "step by step" instructions explaining how

to change the wiper cleaner in the cassette.

(continued on page 8)

Issue 7

•

Fall 2009