ページを印刷するDisplay
+ digit
/
/
3.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
burns from residual heat.
The indicator shows the level
of the residual heat.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Gas burners
Burner overview
D
A) Burner cap
B) Burner crown
C) Ignition candle
D) Thermocouple
Description
Power function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking /
keep warm / residual heat.
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
/
/
There is a risk of
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
Ignition of the burner
A
B
C
1. Push the control knob down and turn
it counterclockwise to the maximum
gas supply position (
will switch on in the two burner
crowns of Dual burner. To light the
internal crown of the Dual burner
push down the control knob and turn
it clockwise to the maximum position
(
2. Keep the control knob pushed for
equal or less than 10 seconds. This
Always light the burner
before you put on the
cookware.
WARNING!
Be very careful when you use
open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
). The flame
).
ENGLISH
9