- ページ 19

洗濯機 AEG 61300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 61300 48 ページ。 Washing machine
AEG 61300 にも：取扱説明書 (48 ページ)

Run wash cycle

To run a wash cycle proceed as follows:

1. Check whether the water tap is open.

2. Open the door, load the washing.

3. Shut the door.

4. Add detergent/conditioner.

5. Set the correct washing program:

set the program on the program selector;

set the temperature on the temperature selector;

press the desired additional button to select the type of washing.

6. Press the ON/OFF button.

The washing machine is switched on. The washing program starts.

7. If applicable change final spin speed/select RINSE HOLD.

You can change this setting and the temperature during the entire

washing cycle.

After the washing program has finished:

Important! If the washing cycle ends with rinse hold, before opening

the door carry out a PUMP OUT or SPIN.

8. Open the door, remove the washing.

9. Press the ON/OFF button!

10. Close the water tap.

We recommend you unplug the appliance and turn off the water sup-

ply when the wash program has finished.

Operating Instructions