- ページ 13

洗濯機 AEG 72950MのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 72950M 40 ページ。

If an incorrect option is selected, the yellow pilot light of the button 7 blinks 3 times and
the message Err is displayed for a few seconds.

Select the DELAY START (button 8)

Before you start the programme , if you wish to delay the start, press the button re-
peatedly, to select the desired delay.
The corresponding symbol will appear on the display. The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours
by means of this button.
The selected delay time value will appear on the display for about 3 seconds, then the
duration of the programme will appear again.
You must select this option after you have set the programme and before you press the
button 7 .
You can modify or cancel the delay time at any moment, before you press the button 7 .
The door will be locked throughout the delay time. If you wish to add laundry in the machine
during the delay time, press the button 7 to set the machine to pause. When the Door
symbol disappears, the door can be opened. Add the laundry, close the door and press the
button 7 again.
Selecting the delayed start.
• Select the programme and the required options.
• Select the delay start.
• Press button 7 : the appliance starts its hourly countdown. The programme will start
after the selected delay has expired.
Cancelling the delayed start
• Set the washing machine to PAUSE by pressing the button 7 ;
• Press button 8 until the symbol
• Press the button 7 again to start the programme.
The selected delay can be changed only after selecting the washing programme again.
The Delay Start can not be selected with Drain programme.

Altering an option or a running programme

It is possible to change some options before the programme carries them out. Before you
make any change, you must pause the washing machine by pressing the button 7 .
Changing a running programme is possible only by resetting it . Turn the programme
selector dial to
pressing the 7 button again. The washing water in the tub will not emptied out.

Interrupting a programme

Press the button 7 to interrupt a programme which is running, the corresponding light
starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to
a new programme.
' is displayed;
and then to the new programme position. Start the new programme by
to cancel a programme which is running. Now you can select
13
Daily use