- ページ 29
プリンター Brother TD-4100NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother TD-4100N 37 ページ。 Network users manual - spanish
Brother TD-4100N にも： 技術仕様 (4 ページ), ソフトウェア取扱説明書 (40 ページ), ネットワーク・ユーザー・マニュアル (39 ページ), ユーザーマニュアル (36 ページ), マニュアル (20 ページ), (スペイン語）グ (40 ページ), (スペイン語）取扱説明書 (39 ページ)
ページを印刷する
Installing the Software
4 Controlling with ESC/P
Commands
Fonts and several bar codes are embedded within this machine. You can send
commands to print embedded characters and Bar code.
Available Commands
The available commands are Brother TD proprietary commands based on ESC/P.
The latest command tool can be downloaded from the following website.
http://solutions.brother.com
Choose your region (eg. Europe), your country, your model and Downloads for your
model.
Serial Cables
The pin assignments for the serial cables (RS-232C cables) which can be used with this
machine are shown in the table below. You can purchase the cables at an electronics
store. Do not use an interface cable that is longer than 2 metres.
Brother TD side
D-sub female, lock screw #4-40 (UNC).
Signal
Pin
Name
Number
DCD
1
RXD
2
TXD
3
DTR
4
GND
5
DSR
6
RTS
7
CTS
8
RI
9
It is not possible to connect a RS-232C cable and USB cable to the printer at the
•
same time.
The RS-232C serial connector part of this equipment is not Limited Power Source.
•
Pin Assignments
PC side
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI
26
STEP
1
STEP
2
STEP
3