- ページ 9

ノートパソコン Fujitsu LifeBook A1010のPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu LifeBook A1010 15 ページ。 Lifebook a series

ページを印刷する

DISKS MENU

The Disks menu allows you to set information about

your system's hard- and floppy-disks, including:

Enable or disable internal floppy disk drive controller

Configure multiple diskette drives, if applicable.

Enable or disable the internal hard disk controller

Select the timing for hard disk drive and data transfers.

Enable or disable hard disk drive security

Internal FDC

Diskette Drives

Internal HDC

IDE Settings

__ HDD Security

Figure 9. Disks Menu

Default

Field

Internal

[Checked]

FDC

Diskette

---

Drives

Internal

[Checked]

HDC

IDE

–—

Settings

HDD

[Unchecked]

Security

Description

This item enables or disables the

internal floppy disk drive control-

ler. It is enabled by default.

When selected, opens the

Diskette Drives submenu. This

would be used only if more than

one diskette drive is installed or

connected.

This item enables or disables the

internal hard disk drive controller.

It is enabled by default.

When selected, opens the IDE Set-

tings submenu, which allows you

to select the timing and data

transfer rates of the hard disk

drive. (For more details, see IDE

Settings submenu later in this sec-

tion).

Enables or disables the hard disk

drive security feature. It is disabled

by default. The HDD security fea-

ture attaches the administrator's

password to the hard drive so that

if it is installed in a different sys-

tem, the password will still be

required to access its contents.

D i s k s M e n u

IDE Settings Submenu

The IDE Settings submenu allows you to select the

timing speed for the system hard disk drive, as well as

the data transfer rates.

IDE Settings

HDD Timing

( ) Standard

( ) Fast PIO

( ) Multiword DMA

( ) Ultra DMA

(*) ATA-66/100

I/O 32 bit transfer

( ) Disabled

(*) Enabled

HDD Block transfer

( ) Disabled

(*) Enabled

Figure 10. IDE Settings submenu

The IDE Settings submenu is divided into three sections:

HDD Timing:

Standard

Fast PIO

Multiword DMA

Ultra DMA

ATA-66/100

I/O 32 bit transfer:

This field is Enabled by default. When it is disabled, the

bit transfer is I/O 16 bit transfer.

HDD Block transfer:

This field is Enabled by default. When it is disabled,

system access to the hard disk drive is one sector per

Read/Write.

Cancel