- ページ 38

ラベルメーカー Brother Innov-is 1000のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother Innov-is 1000 42 ページ。 Users manual - spanish
Brother Innov-is 1000 にも：ユーザーマニュアル (1 ページ), クイック・リファレンス・マニュアル (26 ページ), ユーザーマニュアル (1 ページ), ユーザーマニュアル (1 ページ), クイック・リファレンス・マニュアル (26 ページ), (ユーザーガイド (1 ページ)

Brother

Serger/

Overlock

Feet

Pearls and Sequins Foot

Attaches threaded pearls or beads on the edge of fabric. Can be used

for string of 3 to 4 mm pearls and beads.

1. Retract the knife on your machine.

2. Set the machine setting: 3 thread overlock, stitch length to pearl size, stitch width to

3 mm from 5 mm, and adjust the tension.

3. Fold the fabric.

4. Align the edge of the fabric to the guide on the front of the foot.

5. Adjust the guide so that the needle moves down at the position of 1 to 1.5 mm from the

folded edge.

6. Place the strings of pearls/beads onto the tunnel and then sew.

SA211, XB0537-001

XB0537-001 is for 1034D, and SA211 is for

the other models.

Party Bag

Piping Foot

Sews piping tapes with two pieces of fabric together. Ideal for edge

decoration of bags, cushions, etc.

1. Set the machine setting: 3 thread overlock, stitch width at 5 mm, or 4 thread overlock,

stitch width at 3 mm, stitch length to 3.

2. Place two fabrics inside out together and insert the piping tape between them.

3. Align them and set the core of the piping tape into the groove under the piping foot.

4. Sew and then open the fabrics.

SA210

Attaches tapes and elastic to stretch fabrics.

1. Set the machine setting: 3/4 thread overlock, stitch length to 3 - 4mm for tape

attaching, 4 - 5mm for elastic tape attaching.

2. Place the tape/elastic tape into the tape guide and then under the foot.

3. Sew.

Note: When the fabrics gather, tighten the thread tension.

SA212

Brother

Serger/

Overlock

Feet

Piping Foot

Taping Foot