- ページ 2

ラベルメーカー Brother P-touch 200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-touch 200 2 ページ。

ページを印刷する

COMPOSITE CHARACTERS

You can create composite characters, which consist of a letter

and an accent. The accents available are ´, `, ¨, ˆ, and ˜.

(1) Hold down

and press the key to enter the accent you

CODE

want.

(2) Press the key of the letter you wish to join with the accent. The

letter and accent will be displayed together in your message.

ACCENTED CHARACTERS

You can choose from a list to add other accented characters to

your message.

(1) Press

if you want the accented character to be an

CAPS

uppercase letter.

ACCENT

(2) Hold down

and press

. The message "A-Y?" is

CODE

displayed.

(3) Press the key corresponding to the letter in the desired

accented character.

(4) Press

and

to move the cursor under the accented

character that you wish to use.

(5) Press

to add the selected character to your message.

SYMBOLS

In addition to the letters, symbols, and numerals on the key

tops, there are 50 symbols available in Symbol mode. These

symbols are divided into 13 groups, corresponding to the

letters A through M.

Group No.

SYMBOLS

Group No.

SYMBOLS

←

→

[

]

;

To input a symbol from Symbol mode:

FEED

(1) Press

to enter Symbol mode. The message "A-M?" is

SYMBOL

displayed.

(2) Press the key of the letter whose group contains the

symbol you wish to use. The symbols in that letter's group

will be displayed.

(3) Press

and

to move the cursor under the symbol

you want.

(4) Press

to display your message with the selected

character added to it.

(5) Repeat steps (1) through (4) if you wish to add another

symbol to your message.

SIZE

There are five different character sizes that you can select for

your message. The indicator at the top of the display shows the

currently selected size.

A (1) Standard size

(4) Double width & double height

(8) 4 × Width & double height

A (W2) Double width

(H2) Double height

To choose a character size:

SIZE

(1) Hold down

and press

to change the character size.

CODE

SIZE

(2) Continue holding down

and pressing

until your

CODE

desired character size is indicated. The sizes change in

the following order:

STYLE

You can also use one of nine different print styles for the

characters in your label.

NORM (normal)

IT+O (italic + outline)

OUTL (outline)

IT+B (italic + bold)

BOLD

IT+S (italic + shadow)

SHAD (shadow)

VERT (vertical)

ITAL (italic)

STYLE

(1) Hold down

and press

once. The current print

CODE

style is displayed.

(2) Continue holding down

and pressing

CODE

desired print style appears. If you select a style other than

normal, the STL indicator on the bottom of the display

comes on.

UNDERLINE/FRAME

You can add an underline or frame to your message when you

wish to emphasize the text.

TEXT (no underline or frame)

BOX2

↑

↓

UNDL (underline)

BOX3

BOX1

BOX4

ABC / ABC

(1) Hold down

and press

once. The current

CODE

underline/frame setting appears on the display.

(2) Continue holding down

and pressing

CODE

desired underline/frame appears. If you select underlining

or a frame, the

indicator on the bottom of the

ABC / ABC

display comes on.

LABEL LENGTH

Although the length of the printed label automatically adjusts to fit

the length of the entered text, there may be times when you will want

to make a label with a specific length. The Label length mode allows

you to set the label to a length between 50 and 300 mm.

LENGTH

(1) Hold down

and press

once. The current label

CODE

length setting appears on the display. If "L---" is displayed,

the Label length mode is off. When the Label length mode

is on, "L" and the current setting (in millimetres) are shown.

(2) Continue holding down

and pressing

CODE

length mode is turned on and the current setting is displayed.

(3) Use the number keys or press

label length that you want to use.

(4) Press

to display the length of the currently entered

text and check that it is less than the set length.

(5) Press

to set the label length.

DOUBLE-LINE PRINTING

This option enables two lines of text to be printed, one above

the other. Double-line printing can only be used if 9- or 12-mm-

wide tape is installed.

(1) Enter the text for the upper line.

D.LINE

(2) Hold down

and press

. The lower line marker ( )

CODE

will appear on the display.

(3) Type the text for the lower line.

TAPE FEED

This function can be used to leave equal margins of 8 mm (#),

12 mm (##) and 24 mm (###) on the left and right sides of the

label. In addition, one label with multiple format styles can be

printed using the setting (–) which does not feed the tape after

printing the label.

(1) Hold down

and press

CODE

setting appears on the display.

(2) Continue holding down

desired setting appears.

MIRROR PRINTING

This function prints your label so that the text is legible from the

adhesive side of the tape. If mirror-printed labels are attached

to glass, such as a showroom, or some other transparent

material, they can be read correctly from the opposite side. For

this application, transparent tape must be used.

STYLE

until your

(1) Hold down

and press

CODE

printing setting appears on the display. When "M: ×" is

displayed, the text is printed normally. If "M: O" appears,

the mirror printing function is on.

(2) Continue holding down

desired setting appears.

PRINTING & CUTTING

After you have changed the format of the text, you are ready to

print the label.

MIRROR

Press

. The message "PRNT" is displayed while the

message is being printed. The label comes out of the tape exit

slot on the top end of the machine.

To cut the tape:

(1) If the tape margins are set to "–", "#" or "##", hold down

ABC / ABC

until your

FEED

and press

CODE

SYMBOL

message "FEED" is displayed while the tape is fed.

(2) Push in the tape cutter button on the left side of the

machine.

REPEAT PRINTING

This function allows you to repeatedly print the same label up

to nine times.

It is recommend to set the tape margins to "#" or "##". (Refer to

TAPE FEED.)

(1) Hold down

and press

CODE

displayed.

(2) Press the number key (1-9) corresponding to the number of

LENGTH

until the Label

labels you want. For example, if you want to print nine

LENGTH

labels, press

and

to enter the

MIRROR

(3) Press

and the set number of labels will be printed. If

the margins are set to "–", "#" or "##", hold down

FEED

press

before cutting the tape. (Refer to TAPE FEED.)

SYMBOL

(4) Push in the tape cutter button to cut the tape, then cut

along the printed dots to separate the labels.

NUMBERING

This function can be used to print a set number of labels in

which the designated number automatically increases by 1

after the label is printed, for example when printing labels

containing a date ("JULY 4, 1962", "JULY 5, 1962", and

"JULY 6, 1962").

It is recommend to set the tape margins to "#" or "##". (Refer to

TAPE FEED.)

(1) Position the cursor beneath the number in the text to be

increased, then hold down

message "1-9?" is displayed.

(2) Press the number key (1-9) corresponding to the last

number that is to be printed. For the example explained

above, press

(3) Press

repeated, with the specified number increased by 1, until

TAPE

once. The current tape feed

the entered number is reached. If the margins are set to "–

", "#" or "##", hold down

TAPE

and pressing

until your

cutting the tape. (Refer to TAPE FEED.)

CODE

(4) Push in the tape cutter button to cut the tape, then cut

along the printed dots to separate the labels.

PHRASE MEMORY

You can use the Phrase Memory to store your most frequently

used messages. Text stored in the Phrase Memory will not be

deleted by the usual message deleting operation (holding

down

CODE

You can easily recall your message from this Phrase Memory

MIRROR

any time you want to work with it.

once. The current mirror

MEMORY SIZE

MIRROR

and pressing

until your

In the Phrase Memory you can store up to a total of 300

CODE

characters. These 300 characters can be divided into as many

as nine areas.

The maximum capacity for any single area is 55 characters.

STORING THE MESSAGE

(1) Hold down

displayed.

(2) Press the number key (1-9) corresponding to the Phrase

Memory area that you wish to select. Your message is

stored in the chosen area and the message previously

shown in the working area reappears on the display.

If the area you select is already being used, the error message

. (Refer to TAPE FEED.) The

"ERR" will briefly appear, then you will again be asked to

choose an area. In this case, select a different area between 1

and 9.

If messages are already stored in all nine areas, you must

delete one of them before you can store your current message.

Also, when 300 characters are already stored in the Phrase

Memory and you try to store more, the message "FULL" will

appear on the display. You must delete one of the memory

areas before you can store your current message.

RECALLING & DELETING

FROM PHRASE MEMORY

REPEAT

. The message "1-9?" is

(1) Hold down

displayed.

(2) Press the number key (1-9) corresponding to the Phrase

Memory area containing the message that you want to

recall or delete. The number and the beginning of the

and

selected message appear on the display. If you selected

CODE

the wrong number, you can now press a different number

key (1-9) to display the correct message.

(3) Recalling: Press

the Phrase Memory and display it in the working area for

use.

Deleting: Hold down

selected message from the Phrase Memory.

NUMBER

and press

. The

CODE

MIRROR

and the labels will be printed. Printing will be

FEED

and press

before

CODE

SYMBOL

CLEAR

and pressing

) .

STORE

and press

. The message "1-9?" is

CODE

RECALL

and press

. The message "1-9?" is

CODE

to recall the message selected from

CLEAR

and press

to delete the

CODE