- ページ 16

ラベルメーカー Brother P-TOUCH CUBE PT-P300BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-TOUCH CUBE PT-P300BT 18 ページ。 Tze tape
Brother P-TOUCH CUBE PT-P300BT にも：ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ)

6. Pair the Label Printer with Your Mobile Device

On your mobile device:

1. In Settings, access the Bluetooth option, and turn it ON.

2. When the list of discovered Bluetooth devices appears, tap PT-P300BT**** (where ****

is the last four digits of your label printer's serial number. Alternatively, you can find your

machine number on the sticker below the Power Button). The unit's serial number is

located where the TZe Tape Cassette is set inside the Cassette Cover.

3. If asked to enter a PIN Code, enter "0000".

NOTE

• Pairing instructions may differ slightly, depending on the smartphone or tablet you are

using.

• If your machine is not discovered by your mobile device via Bluetooth, check the following

and then try to connect again:

- The machine may be connected to another mobile device. If so, turn off Bluetooth on that

device, or turn off your machine and then on again.

- Check that the machine is not in sleep mode.

- Place your mobile device as close to the machine as possible.

- Make sure there are no obstacles or items that emit radio waves, such as a microwave

oven, between the machine and your mobile device. If such obstacles or items are present,

use the label printer away from them.

• If using a Smart Cover on your tablet, ensure that the cover remains open while you are

creating or printing labels. Closing the Smart Cover may interrupt data communication, and

your labels will not print.