- ページ 34

洗濯機 AEG L 61271 BIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG L 61271 BI 36 ページ。 Washing machines
AEG L 61271 BI にも：ユーザーマニュアル (36 ページ)

34 www.aeg.com

Fig. 4

Fig. 5

Fig. 6

• Hinges

To mount the hinges it is necessary to

drill two holes (dia. 35 mm, depth

12.5-14 mm depending on the depth

of door furniture) on the inner side of

the door. The distance between the

holes hobs fixing centres must be 416

mm.

The distance from upper edge of the

door to the centre of the hole de-

pends on the adjacent furniture's di-

mensions.

The hinges will be fixed to the door by

means of screws for wood 1 and 2

(Fig. 4) supplied with the appliance.

• Mounting the door

Fix the hinges to the appliance by

means of the M5x15 screws . The hing-

es can be adjusted to compensate for

possible uneven thickness of the door.

To align the door perfectly it is neces-

sary to loosen the screw , adjust the

door and tighten the screw A again

(Fig. 5).

Do not remove the screw B (Fig.

• Counter-magnet

The appliance is prearranged for a

magnetic closure of the door. To ena-

ble a correct operation of this device,

it is necessary to screw the counter-

magnet A (steel disk + rubber ring) in-

to the inner side of the door.

Its position must correspond to the

magnet B on the appliance (Fig. 6).

Do not remove the screw C.