ラベルメーカー Brother P-touch H105のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-touch H105 2 ページ。
Brother P-touch H105 にも：ユーザーマニュアル (2 ページ)

ページを印刷する

User's Guide

English

With your P-touch H100/H105/GL-H100/GL-H105, you can create

labels for multiple applications. Select from the many frames,

character sizes and styles to design beautiful custom labels. In

addition, the variety of tape cassettes available allows you to print

labels with different widths and exciting colours.

Read this manual carefully before you begin and keep the manual in

a handy place for future reference.

For PT-H105/GL-H105, it is possible to use an adaptor. The use of

an adaptor is optional and can be purchased if required. All

references in this manual to the adapter are for PT-H105/GL-H105

only.

Printed in China

LAD551001

Power Supply and Tape Cassette

Cassette

cover

Tape cutter

lever

Open the cassette cover by pressing the

above indicated area at the top end of the

P-touch.

If a tape cassette is already installed, remove it by

pulling it straight up. Also, if batteries are already

installed, remove them.

• Make sure that the power is turned off when

replacing batteries or tape cassettes.

LCD Display & Keyboard

Troubleshooting

Error message

Message

Cause/Remedy

The batteries are weak.

If using AAA alkaline batteries: Replace them with new

Low Battery!

ones.

If using Ni-MH batteries: Charge them fully.

Battery Dead

The installed batteries have expired.

An invalid number was entered as the label length.

Invalid!

(This is not displayed in Auto Designs).

• You tried to print a text file when there is no data

stored in the memory.

•

is pressed when no text is entered.

No Text!

• You tried to select Text Preview or Cable Label when

no text is entered.

•

was pressed when no text was entered while

using the DECO MODE or Auto Designs.

• You tried to enter a 3rd line by pressing

Line Limit!

• You tried to print or preview two lines of text while

3.5mm or 6 mm tape is installed. Install tape of a

larger size.

You tried to print a label when there is no cassette

No Cassette!

installed.

The tape cutter lever was used during the printing

Cutter Error

process.

Safety Precautions

Indicates a potentially hazardous

WARNING

situation which, if not avoided,

could result in death or serious

injuries.

Follow these guidelines to avoid the risk of fire, burns, injury,

electric shocks, rupture, overheating, abnormal odours or

smoke.

• Always use the specified voltage and the recommended AC adapter (AD-24ES) for

the P-touch to prevent any damage or failure.

• Do not touch the P-touch during a lightning storm.

• Do not use the P-touch/AC adapter in places of high humidity (such as bathrooms).

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly

bend or pull the power cord. Always hold the AC adapter carefully when

disconnecting from the power outlet.

• Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that

is loose.

• Do not allow the P-touch/AC adapter/power plug/batteries to get wet, for example,

by handling them with wet hands or spilling beverages onto them.

• Since loss of eyesight may result when leaked fluid from batteries gets into your

eyes, immediately rinse your eyes with a large amount of clean water, and then

seek medical attention.

• Do not disassemble or modify the P-touch/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the

batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter, remove batteries immediately and stop using the P-

touch if you notice abnormal odour, heat, discolouration, deformation or anything

unusual while using or storing it.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

• Do not use a deformed or leaking battery or one with a damaged label. There is a

possibility of generating heat.

Insert six new AAA alkaline batteries

(LR03) or fully charged Ni-MH batteries

(HR03), making sure that their poles

point in the correct directions.

Users of alkaline batteries:

Always replace all six batteries at the

same time with brand new ones.

Users of Ni-MH batteries:

Always replace all six batteries at the

same time with fully charged ones.

NOTE

Visit us at http://solutions.brother.com/ for the latest

information about the recommended batteries.

Size

14. Style key

Cursor

15. Character keys

Caps

16. Caps key

Underline/Frame

17. Symbol key

Width

18. Menu key

Style

19. Clear key

Label Length

20. Print key

If a specific label length has been

21. Enter key

selected,

also appears.

22. Auto Designs key

Guidance (left, right)

23. Frame key

Power key

24. Accent key

10. Cursor key : Right

25. Space key

11. Cursor key : Left

12. Backspace key

13. Size key

NOTE

• The LCD shows one row of 12 characters; however, the text that

you enter can be up to 80 characters in length.

• While selecting the settings, press the Space key to go back to

the default item.

• The print preview is a generated image of the label, and may

differ from the actual label when printed.

• Label length shown on LCD may slightly differ from the actual

label length when printed.

Message

Cause/Remedy

The maximum number of characters (80 characters for

Text Full!

regular text, 50 characters for Auto Designs and DECO

MODE) have already been entered.

With the DECO MODE function:

Since the number of entered characters exceeds the

label length, reduce the text.

Text Limit!

All other functions:

Since the number of entered characters exceeds the

label length, reduce the text or select [Auto] as the label

length.

Printing on 3.5mm tape with invalid Frame setting ON.

No Frame OK?

(Select

to print with no Frame,

cancel).

Feeding tape after printing when [Chain Print] is

OK to Feed?

selected. Refer to "Setting Margin".

Only 12mm tapes are available for use with DECO

Insert 12mm

MODE function.

Wrong Tape!

Use a tape cassette with the

CAUTION

Follow these guidelines to avoid personal injury, liquid

leakage, burns or heat.

• When the P-touch is not being used, store it out of the reach of children. In addition,

do not allow children to put P-touch parts or labels in their mouths. If any object has

been swallowed, seek medical attention.

• Do not touch metal parts near the print head immediately after printing.

• Do not touch the cutter blade.

• If leaked fluid from batteries gets onto your skin or clothes, immediately rinse them

with clean water.

• Remove the batteries and disconnect the AC adapter if you do not intend to use

the P-touch.

• Do not use a battery other than that specified. Do not use combinations of old and

new batteries or combinations of different types, different charging levels, different

manufacturers or different models. Do not insert a battery with its plus and minus

ends reversed.

• Do not drop or hit the P-touch/AC adapter.

• Do not press on the LCD display.

• Do not put your finger inside the P-touch when you close the cassette cover.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the

batteries and battery charger, and be sure to use them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a specialized

battery charger before using the batteries.

General Precautions

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the colour of the label may change or be

transferred to other objects. Before applying the label, check the environmental

conditions and the material.

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the P-touch.

• Use Brother TZe tapes with the P-touch.

• Only use a soft, dry cloth to clean the P-touch; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head directly.

• Do not put any foreign objects into any part of the P-touch.

Print head

End of tape

Toothed

wheel

Tape guide

Insert a tape cassette, making sure that

it snaps into place.

• Make sure that the end of the tape feeds under

the tape guides.

• Use only Brother TZe tapes with P-touch.

Specifications

Dimensions:

Approx. 110(W) × 208(D) × 59(H)mm

(W x D x H)

Weight:

Approx. 390 g

(without batteries and tape cassette)

Power supply:

Six AAA alkaline batteries (LR03)

Six AAA Ni-MH batteries (HR03)*

Optional AC adapter (AD-24ES)

Tape cassette:

Brother TZe tape (width)

3.5mm, 6mm, 9mm, 12mm

Visit us at http://solutions.brother.com/ for the latest

information about the recommended batteries.

What to do when...

Problem

The display stays blank

• Check that the batteries are correctly

after you have turned on

inserted.

the P-touch.

• If the batteries are weak, replace them.

When the label is printed

• See "Setting Margin" in this users guide

out, the margin(space) is

and select [Half] or [Narrow] to have

too large on both sides of

smaller margins for your label.

the text.

• Check that the tape cassette has been

The P-touch does not

inserted correctly.

print, or the printed

• If the tape cassette is empty, replace it.

characters are not formed

• Check the cassette cover is properly

properly.

closed.

• If the batteries are weak, replace them.

• When power is disconnected for more

The setting has cleared

than three minutes, all text & formats in

on its own.

the display will be lost. Language and Unit

settings will also be cleared.

mark.

• There may be some dust on the print

head. Remove the tape cassette and use

A blank horizontal line

a dry cotton swab to gently wipe the print

appears through the

head with an up-and-down motion.

printed label.

• The print head can be cleaned more

easily if the optional print head cleaning

cassette (TZe-CL3) is used.

• Do not place the P-touch, batteries or AC adaptor in direct sunlight or rain, near

Indicates a potentially hazardous

heaters or other appliances, or in any location exposed to extremely high or low

situation which, if not avoided,

temperatures (e.g. on the dashboard or in the back of your car). Avoid high

may result in minor or moderate

humidity or dusty locations.

injuries.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and P-touch.

• Any data stored in memory will be lost due to failure or repair of the P-touch, or if

the battery expires.

• The P-touch is not equipped with a charging feature for rechargeable batteries.

• The length of the printed label may differ from the displayed label length.

• A protective clear plastic sticker is placed over the display during manufacturing

and shipping. This sticker should be removed prior to use.

• When power is disconnected for more than three minutes, all text, format settings

and any text files stored in the memory will be cleared.

For PT-H100/GL-H100

We,

Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product is in conformity with the essential requirements of all relevant directives

and regulations applied within the European Community.

The Declaration of Conformity (DoC) can be downloaded from our website.

Visit http://solutions.brother.com/ and:

•

select "Europe"

•

select your country

•

select your model

•

select "Manuals" and your language, then click "Search"

•

select Declaration of Conformity

•

click "Download"

Your Declaration will be downloaded as a PDF file.

For PT-H105/GL-H105

We,

Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product and AC adapter are in conformity with the essential requirements of all

relevant directives and regulations applied within the European Community.

The Declaration of Conformity (DoC) can be downloaded from our website.

Visit http://solutions.brother.com/ and:

•

select "Europe"

•

select your country

•

select your model

•

select "Manuals" and your language, then click "Search"

•

select Declaration of Conformity

•

click "Download"

Your Declaration will be downloaded as a PDF file.

Cutter's

edge

Tape

exit slot

Securely close the cassette cover, making

sure that it snaps into place.

NOTE

When using optional AC adapter (AD-24ES)

Connect the AC adapter into the AC adapter socket on

the bottom of the P-touch.

Insert the plug into the nearest standard electrical

outlet. For memory back up, we recommend using

AAA alkaline batteries (LR03) or Ni-MH batteries

(HR03) together with the AC adapter.

Initial Settings

Start your P-touch.

Supply power by using six AAA batteries, and then press

Set the language.

[English/Español/Français/Hrvatski/Italiano/Magyar/

Nederlands/Norsk/Polski/Português/Portug. (BR)/

Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/

Čeština/Dansk/Deutsch]

Set the unit of measurement.

The default setting is [mm].

NOTE

• The P-touch automatically turns off if no keys are pressed within

five minutes.

• To cancel any operation, press

Problem

Solution

The P-touch has "locked

up" (i.e., nothing happens

when a key is pressed,

even though the P-touch

is on).

The power turns off when

you try to print.

The tape does not feed

properly or the tape gets

stuck inside the P-touch.

All text and format

settings need to be

cleared to create a new

label.

The LCD is set to an

incorrect language.

Contact may differ by country.

See the Website at http://www.brother.eu/

Declaration of Conformity

(Europe only)

Declaration of Conformity

(Europe only)

AC adapter socket

[Language]

[Unit]

[inch/mm]

Solution

• Refer to "Resetting the P-touch".

• The batteries may be weak. Replace

them.

• Check that the batteries are correctly

inserted.

• If the batteries are weak, replace them.

• Check that the end of the tape feeds

under the tape guides.

• The cutter lever is used while printing. Do

not touch the cutter lever during printing.

• Press

and select [Text&Format].

• Refer to "Initial Settings".

Contact Information