- ページ 8
ラベルメーカー Brother P-Touch M95のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-Touch M95 10 ページ。 Handheld label maker
Brother P-Touch M95 にも: ユーザーマニュアル (9 ページ)
Printing Labels
Text Preview
You can preview the text before printing.
• The LCD displays the whole text and the label length
(mm/inch), then returns to the original text.
• You can only preview the text. Style, size, underline,
frame, or any additional features cannot be previewed.
Feeding (Tape Feed)
+
This function feeds approximately 25 mm of blank tape.
Printing
• To prevent damage to the tape, do not touch the cutter
lever while the message "Printing..." or "Feeding..."
appears.
• To cut the label, press the tape cutter lever on the upper-
left corner of the machine.
• Peel the printed label from the label backing and apply the
label.
Printing multiple copies (
You can print up to nine copies of each label.
You can also select the number of copies by entering it with
the Number Keys
-
Removing the Label Backing
This machine is equipped with a peeler that allows you to
remove the backing from labels.
1.
Insert the label, with the printed surface facing down,
as far as possible into the built-in peeler.
2.
Fold back the label to the right and quickly pull out the
label. The end of the backing is slightly separated
from the label.
3.
Peel the printed label away from the label backing and
apply the printed label.
+
)
[Copies]
.
Saving Label Files
Memory (
+
You can save your original labels onto your machine. Up to
three labels can be saved and recalled for printing at a later
time. You can also edit and overwrite the stored label.
To Save:
To Print:
To Open:
NOTE
If you try to store a label when there is already a label
stored to that number, a message "Overwrite?" appears.
Press
to save your new label. Press
Resetting the machine
You can reset the machine when you want to restore it to
factory settings, or when the machine is not working
correctly.
1
Press
to turn the power off.
2
While holding down
to turn the power on.
3
Release
, and then release
The internal memory is reset, and all text, settings and
stored files are cleared.
)
[Save]
[Print]
[Open]
to cancel.
and
, press
and
[File]
.