12
www.aeg.com
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The lid stays locked. You must drain
the water to unlock the lid.
• The display shows the indicator
7.3 Stains
Set this option to add the stain phase to
a programme.
Use this option for laundry with hard
stains to remove.
8. SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press
time for 6 seconds.
.
To drain the water refer to
'At the end of the
programme'.
This option increases the
programme duration. This
option is not available with a
temperature lower than 40
°C.
and
at the same
7.4 Liquid Detergent
Press this button to adapt the cycle if you
use a liquid detergent.
The related indicator comes on.
7.5 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
7.6 Time Save
With this option you can decrease the
programme duration.
.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set
'Extra Quick' for items with almost no
soil.
Some programmes accept
only one of the two options.
7.7 Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press
and
until the indicator
off.
at the same time
comes on/goes