- ページ 22
ノートパソコン Fujitsu LifeBook E7010のPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu LifeBook E7010 29 ページ。 Lifebook e series
ページを印刷するL i f e B o o k E S e r i e s B I O S
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Supervisor
–—
Password is:
User Password is:
–—
Set Supervisor
–—
Password
Set User Password
–—
Minimum User
–—
Password Length:
I
Password on Boot:
Disabled
I
First Boot
I
Every Boot
I
KB Lock on
Disabled
Resume:
I
Enabled
I
Boot from
All
Removable Media:
I
Supervisor only
Hard Disk Security:
–—
Owner
–—
Information:
I
Security Panel on
Disabled
Resume:
I
Enabled
Exiting from the Security Menu
When you have finished setting the parameters on the
Security Menu, you can either exit from setup utility or
move to another menu. If you wish to exit from setup
utility, press the Esc key to go to the Exit Menu. If you
wish to move to another menu, use the cursor keys.
22
Default
Description
Clear
A display-only field. Set is displayed when the system supervisor password
is set and Clear when it is not.
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter]
Sets, changes or cancels the Supervisor Password. Supervisor's Password
may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case- sensitive. To cancel a pass-
word press the Enter key instead of entering characters in the Enter New
Password field and in the Re-enter New Password field. When a Supervi-
sor Password is set it must be used to access the BIOS setup utility.
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
password press the Enter key instead of entering characters in the Enter
New Password field and in the Re-enter New Password field. When a
User Password is set it must be used to access the BIOS setup utility.
[0]
Supervisor can set password length (0 to 8) for user password. User can-
not set a password shorter than the minimum length.
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just
once after the Power On Self Test (POST) before the operating system
will be read from a disk. When set to Every Boot, a password (User or
Supervisor) is required every time after the Power On Self Test (POST)
before the operating system will be read from a disk. When set to Dis-
abled no password is required.
[Disabled]
When set to Enabled, the PS/2 mouse and keyboard inputs are locked out
upon Resume from Suspend or Save to Disk mode until you enter the
password. When set to Disabled no password is required. If no Supervisor
Password is set, this feature is not available and no password is required.
[All]
Enable password allows supervisor access only.
–—
Configures hard disk security features
–—
Sets Owner information.
Enabled
Enables or disables the Security Panel feature upon Resume from
Suspend.