- ページ 26
ノートパソコン Fujitsu Lifebook E8020DのPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Lifebook E8020D 29 ページ。 Fujitsu lifebook e series
ページを印刷するL i f e B o o k E S e r i e s B I O S
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
■
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM
■
is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk for-
mat is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if
the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designations, however, your application software will use
the new designations.
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.
26
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot Device Priority
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
F1
Help
Select Item
ESC
Exit
Select Menu
Figure 18. Boot Device Priority Submenu
Description
The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To view all devices related to a source, press [Enter]; to view all devices related to all sources, press
[Ctrl] + [Enter]. To change the order, highlight one source by using the [up] or [down] cursor keys and then
press the [+] or [-] key to change the order number. [Shift] + [1] enables a device. Tapping [d] removes from
the list a device that is not installed.Be sure to save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,
depending upon your operating environment.
Power Savings
Boot
Item Specific Help
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
-/Space
Change Values
Enter
Select
Sub-Menu
F9
Setup Defaults
F10
Save and Exit