ラベルメーカー Brother P-Touch PT-2430PCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-Touch PT-2430PC 2 ページ。 Brother labeller users guide
Brother P-Touch PT-2430PC にも：パンフレット (4 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (2 ページ)

ページを印刷する

E n g l i s h

Printed in China

www.brother.com

LW3977001

INTRODUCTION

Thank you for choosing the PT-2430PC.

Your new P-touch labeller uses P-touch Editor Lite software, which is already installed on your labeller. There is no need to install any software

or drivers onto your PC in order to make creative labels.

This manual includes important precautionary information and simple instructions for operating your new P-touch labeller.

Be sure to read the instructions before use and use the product in accordance with these instructions. Keep this manual handy for future reference.

If new versions of the PT-2430PC software become available, this manual may not reﬂ ect the updated features. Therefore, you may ﬁ nd that the

software and the contents in this guide are different.

Declaration of Conformity

BROTHER INDUSTRIES, LTD.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

declare that the P-touch Labeller PT-2430PC conforms with the following normative documents:

EMC:

EN 55022: 2006 Class B

EN 55024: 1998 + A1: 2001 + A2: 2003

EN 61000-3-2: 2006

EN 61000-3-3: 1995 + A1: 2001 + A2: 2005

and follows the provisions of the Electromagnetic Compatibility Directive 2004/108/EC.

The AC adapter AD-24ES also conforms with EN 60950-1: 2001 and follows the provisions of the Low Voltage Directive 2006/95/EC.

Issued by: BROTHER INDUSTRIES, LTD.

Quality Management Dept.

Getting Ready

Review the names of P-touch labeller parts.

Feed &

Cut button

LED lamp

Power button

Tape exit slot

AC adapter (included)

connecter

USB port

Mode selector

switch

The PT-2430PC has 2 mode selector settings - "EL" and "E". The mode

selector switch is pre-set at the factory to the EL mode, for use with

P-touch Editor Lite. For E mode, you will need to install P-touch Editor

5.0, a more advanced labeling software, and the required drivers from the

enclosed CD. For details on how to install P-touch Editor 5.0, see "Starting

P-touch Editor 5.0" below.

Connect the P-touch labeller's power supply.

When using the included AC adapter (AD-

24ES), insert the plug on the adapter cord

into the adapter socket on the bottom end

of the P-touch labeller. Insert the plug into

the nearest standard electrical outlet.

Connect the USB cable and start P-touch Editor Lite.

Connect the

Turn on the P-touch

USB cable.

labeller. The LED lamp

will light up.

How to disconnect the P-touch

labeller

Exit P-touch Editor Lite by clicking on the

To disconnect the labeller, click the icon in the computer's

task bar (

, or

Click Safely remove USB Mass Storage Device.

When The device can be safely removed is displayed,

turn off the P-touch labeller and disconnect the USB cable.

USER'S GUIDE

Open the cassette

Release lever

Print head

cover.

Tape cutter

Verify that the P-touch labeller is

turned off. Open the cassette cover

as shown by the arrow in the above

illustration while pressing the "<<"

section of the tape cover.

Windows

2000 User

Windows

XP User

A pop-up window

will appear. Select

P-touch Editor

Lite and click OK.

Windows Vista

A pop-up window

will appear. Click

P-touch Editor

Lite.

at the top right.

Starting P-touch Editor 5.0

SAFETY PRECAUTIONS

WARNING

• Always use the speciﬁ ed voltage and the included AC adapter (AD-24ES) for this machine to prevent any damage or failure.

• Unplug the power cord immediately and stop using the P-touch labeller during an electrical storm. There may be a remote risk of electric shock from lightning.

• Do not use the AC adapter in places of high humidity such as bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly bend or pull the power cord. When disconnecting the power cord from the power outlet, al-

ways hold the plug.

• To prevent ﬁ re or electric shock, make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose.

• Do not get the machine/AC adapter/power plug wet, such as by handling them with wet hands or spilling beverages onto them.

• Do not disassemble or modify the P-touch labeller/AC adapter/batteries.

• Do not use metallic articles, such as tweezers or a metallic pen, when exchanging the batteries.

• Do not throw into ﬁ re or heat up the battery.

• Disconnect the AC adapter, remove batteries and stop using immediately if you notice any abnormal odour, heat, discolouration, deformation or anything unusual while in use,

or in storage.

CAUTION

• To avoid injuries, do not touch the blade of the cutter unit or any metal parts near the print head.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the P-touch labeller for an extended period of time.

• Do not use old and new batteries together or mix alkaline batteries with other type batteries, or set the positive and negative end in the wrong position. Otherwise, the batter-

ies may leak or be damaged.

• To prevent damage or breakage, do not drop or hit the P-touch labeller/AC adapter.

• Use only the USB cable included with the P-touch labeller.

General Precautions

• Depending on the location, material, and environmental conditions, a label may unpeel or become irremovable, the colour of a label may change or be transferred to other ob-

jects. Before applying labels, check the environmental condition and the surface material.

• Do not use the P-touch labeller in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to the machine.

• Use only Brother TZ tapes with this machine. Do not use tapes that do not have the

• Do not clean the P-touch labeller with alcohol or other organic solvents. Only use a soft, dry cloth.

• Do not touch the print head with your ﬁ ngers at any time, to prevent the possibility of burns. Use a soft wipe (e.g. a cotton swab) when cleaning the print head.

• Do not put any foreign objects into the tape exit slot or AC adapter connector, etc.

• Do not place the P-touch labeller/battery in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (e.g. on

the dashboard or in the back of your car), high humidity, or dusty locations.

• Do not try to print labels using an empty tape cassette in the P-touch labeller. Doing so will damage the print head.

• Do not pull the tape being fed from the P-touch labeller, otherwise the tape cassette or P-touch labeller may be damaged.

Install a tape cassette.

Insert a tape

cassette.

Insert a tape cassette as shown in

the above illustration.

When using the P-touch labeller with bat-

teries, insert six new AA alkaline batteries

(LR6), making sure that their poles point

in the correct directions. Always replace

all six batteries at the same time using

brand new ones.

Go to My Computer and open Removable Disk, then start

P-touch Editor Lite by double-clicking

PTLITE10.EXE.

It will take longer than usu-

al to start P-touch Editor

Lite when connecting P-touch

labeller to your computer for the

first time. If the software does

not start automatically when you

connect the machine, you may

User

launch it from My Computer.

Start P-touch Editor Lite by dou-

ble-clicking

PTLITE10.EXE.

*Microsoft Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other

countries.

*The name of other software or products used in this document are trademarks or registered trademarks of the respective

companies that developed them.

Move the mode selector

If you would like to use the more advanced software that is available for your P-touch labeller,

switch on the back of the

you are able to install P-touch Editor 5.0 from included CD-ROM. This advanced software will

P-touch labeller to the "E"

give you greater label making functionality.

position before connect-

Do not connect the P-touch labeller to your PC before you begin the P-touch

ing the USB cable.

Editor 5.0 installation. For details on how to install P-touch Editor 5.0, see the

installation guide in the included CD-ROM.

International ENERGY STAR

Compliance Statement

The purpose of the International ENERGY STAR

promote the development and popularization of energy-efﬁ cient of-

ﬁ ce equipment.

As an ENERGY STAR

Partner, Brother Industries, Ltd. has deter-

mined that this product meets the ENERGY STAR

energy efﬁ ciency.

mark.

Close the cassette

cover.

• Make sure that the end of the tape feeds under the tape guides.

• If the ink ribbon is loose, use your finger to wind the toothed

wheel in the direction of the arrow on the cassette.

• Use only Brother tapes with the P-touch labeller.

• For initial use of the tape, install the tape, turn on the P-touch la-

beller, and press the Feed & Cut button to cut the tape.

• Make sure that the release lever is up when closing the tape cover.

The tape cover cannot be closed if the release lever is pressed down.

Auto Power Off Function

When the P-touch labeller is operating on battery power

only, it will turn off automatically if not used for a period of 20

minutes. The message "Unsafe Removal of Device" may

be displayed depending on the Operating System running

on your PC. Any data being displayed will be saved. When

you turn the labeller back on, click on the Editor Lite icon to

resume creating your label.

P-touch Editor Lite

starts immediately.

For details on using

P-touch Editor Lite,

see the back of this

sheet.

Do not turn off the power or remove the labeller

while using P-touch Editor Lite.

When using

Windows Vista

When connecting the device for the ﬁ rst time, perform the

scan and then select the Always do this for software and

games check box on the dialog box displayed when the

scan completes. P-touch Editor Lite will start automatically

the next time you connect the P-touch labeller.

Program is to

guidelines for