ページを印刷する24
Problem
The appliance
does not drain the
water.
The appliance
door is open or
not closed correct-
ly.
The anti-flood de-
vice is on.
The spin phase
does not operate.
The programme
does not start.
Possible cause
The filters in the water in-
let hose is blocked .
The water tap is blocked
or is furred with lime-
scale.
The connection of the
water inlet hose is not
correct.
The water pressure is too
low.
The water drain hose is
damaged.
The filter of the drain
pump is blocked.
The connection of the
water drain hose is not
correct.
A washing programme
without the drain phase
is set.
The function Rinse &
Hold is on.
The spin phase is off.
The filter of the drain
pump is blocked.
Balance problems with
the laundry load.
The mains plug is not
connected in the mains
socket.
Blow out fuse in the
household fuse box.
Possible solution
Clean the filters. Refer to 'Care
and cleaning'.
Clean the water tap.
Make sure that the connection is
correct.
Contact your local water authori-
ty.
Make sure that the water drain
hose has no damages.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
Make sure that the connection is
correct.
Set the drain programme.
Set the drain programme.
Close the door correctly.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
Set the spin programme.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
Adjust manually the items in the
tub and start the spin phase
again.
Put in the mains plug.
Replace the fuse.