- ページ 12

ラベルメーカー Brother P-touch PT-E110のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-touch PT-E110 18 ページ。 Electronic labeling system
Brother P-touch PT-E110 にも: ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ)

Brother P-touch PT-E110 ユーザーマニュアル
3
LABEL APPLICATION KEYS

Cable Wrap

Use this function to create a label
that can be wrapped around a
cable or wire.
Turn on the Cable Rotate/Repeat function to
print text repeatedly along the length of the
label so that it can easily be read from any
angle.
To activate the Text Repeat function, press
and then select [CableRot/Rpt].
[Txt Rpt: Off]
/
(Input text)
Cable diameter: 3 mm to 90 mm available
NOTE
• We recommend using Flexible ID Tape for labels attached to cables and wires.
• To cancel the Cable Wrap/Cable Flag/Faceplate functions during operation, press
accordingly.
• Depending on the format you select, the entire contents of your text may not be printed. For example, if
the text is too long to fit into the format, the [Text Limit!] error message will appear.
Find Quality Products Online at:
[Txt Rpt: On]
(Select a cable diameter)
Default: 6 mm
GlobalTestSupply
www.

Cable Flag

Use this function to create a
label that can be wrapped
around a cable or wire with its
ends applied together to form a
flag.
You can select the flag length you want. When
you select [Auto], the flag length is automatically
adjusted according to the text length.
/
(Input text)
• Flag length: 10 mm to 200 mm, Auto
Default: Auto
• Use the Cable Flag function when the
diameter of the object is more than 3 mm.
• Text cannot be rotated when using the Cable
Flag function.
.com
(Select a flag length)
/
or