- ページ 41

ラベルメーカー Brother P-touch QL-1050NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-touch QL-1050N 42 ページ。 Quick setup guide (español) - english
Brother P-touch QL-1050N にも：クイック・スタート・マニュアル (2 ページ), ネットワーク・ユーザー・マニュアル (41 ページ), クイックガイド (2 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (41 ページ), ユーザーマニュアル (24 ページ)

ページを印刷する

Troubleshooting

If the problems occur while using this machine, the following may help you to solve the problems.

Potential types of problems

Problem

• The QL-1060N does not

print, or a printing error is

received.

• The power button is not

lit.

• The printed label contains

streaks or poor quality

characters, or the label is

not fed correctly.

• A data transmission error

appears on the personal

computer.

• Labels are jammed in the

cutter or are not ejected

correctly after printing.

• Layout style is not

updated when Add-in is

still activated and a new

label roll is installed.

• The icon of P-touch

Add-In is not displayed on

Microsoft

Word.

• Cutter error

• Is the USB/Ethernet cable loose?

Check that the cable is connected securely.

• Is the DK Roll installed correctly?

If not, remove the DK Roll and reinstall.

• Is there enough roll remaining?

Check that there is enough roll remaining.

• Is the DK Roll compartment cover open?

Check that the DK Roll compartment cover is closed.

• Has a print error or transmission error occurred?

Turn off the Brother QL-1060N and on again. If the problem is still occurred,

contact Brother Customer Service at 1-877-BROTHER.

• Is the power cord plugged correctly?

Check that the power cord is plugged. If inserted, try plugging it into another

electrical outlet.

* If the power button still does not light up, contact Brother Customer Service at

1-877-BROTHER.

• Is the print head or roller dirty?

While the print head generally remains clean under normal use, lint or dirt from

the roller may become stuck on the printer head. If this occurs, clean the roller.

See

"Roller maintenance" in page

• Is the correct port chosen?

Check that the correct port is chosen from the "Print to the following port" list in

the Printer Properties dialog box.

• Is the QL-1060N in cooling mode (the LED lamp is flashing in orange)?

Wait until the LED lamp stops flashing and then try printing again.

• Is someone printing via network?

If you try to print while other users are printing large amounts of data, the printer

is unable to accept your print job until the ongoing printing is finished. In such

situations, execute the print job again after the other jobs are completed.

• Is there dirt or lint on the roller preventing it from rolling freely?

For details, see

"Roller maintenance" in page

• Was a new label roll installed before activating the P-touch Add-In (The P-touch

function is added to your standard Microsoft toolbar)?

Exit the P-touch Add-In, load the second label roll type, reactivate the P-touch

Add-in, choose "Select Layout", and then verify the layout.

• Is Microsoft

Word started up from Microsoft

• Is Microsoft

Word chosen for the editor usually used for Microsoft

Due to limitation of the program, the Add-In of Microsoft

with above settings. Quit Microsoft

• If the cutter error occurs, keep the DK roll compartment cover closed and press

ON/OFF button. The cutter moves back to the normal position and turns the

machine OFF automatically. After the machine is OFF, inspect the cutter unit

and remove the paper jam.

Solution

40.

Outlook

, and restart Microsoft

Potential types of problems

Outlook

Word is unable to use

Word.