ノートパソコン Fujitsu Lifebook P7010のPDF はじめにをオンラインで閲覧またはダウンロードできます。Fujitsu Lifebook P7010 2 ページ。 P series
Fujitsu Lifebook P7010 にも： 簡単マニュアル (37 ページ), バイオマニュアル (27 ページ)
ページを印刷する
GSG_P7000_pumpkin
4/20/04
2:39 PM
Page 1
Getting started with your new
LifeBook
®
P7000/P7000D notebook
This convenient guide will lead you through the start-up process and offer some valuable tips.
Status Display
Panel
Stereo Speaker
Touchpad Pointing
Device
Microphone
Wireless LAN
SD/Memory Stick slot
On/Off Switch
1. What's in the Box
Check to see that all of the following items are in the box:
LifeBook notebook
Lithium ion battery
AC Adapter with power cord
Weight saver
Phone/Modem (RJ-11) telephone cable
Drivers and Applications Restore (DAR) CD
User's Guide
International Limited Warranty document
Microsoft associated product materials
Microsoft Works CD (XP model only)
International Limited Terms and Condition
Depending upon your configuration, the
following items may also be shipped with your notebook:
Additional Lithium ion battery
Modular second bay battery
Modular DVD/CD-RW combo drive
Modular Supermulti DVD
DVD and CD-RW software application on DAR CD
External floppy disk drive
– Important –
Your hard drive is partitioned into C: and D: drives. The original factory software and utilities image is stored on the
D: drive. If necessary, you can restore your system to the original state in which it was shipped from Fujitsu.
Refer to your User's Guide for more information.
Display
Suspend/Resume/
Power On Button
Stereo Speaker
Num Lock
Indicator
Caps Lock
Indicator
Scroll Lock
Indicator
Scroll Button or Fingerprint Sensor
2. Turn on Your Notebook
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
• Connect either the phone cord or Ethernet cable between
your notebook and the wall jack.
• Press the suspend/resume/power on button to turn on your
notebook.
• Your notebook is now on and the battery is charging.
• Your notebook will begin a power-on self test. Once
successfully completed, the operating system will begin
initialization process.
3. Register
• Enter the information as prompted to personalize your
notebook, and configure your modem to dial.
• Register your notebook with Fujitsu Service and Support via
our Web site at us.fujitsu.com/computers
Drive Image
®
Special Edition
Right Panel
USB 2.0 Ports
LAN (RJ-45) Jack
External Monitor Jack
Headphone Jack
Microphone Jack
IEEE 1394 Jack S-Video Out Jack
Left Panel
Compact Flash Slot
DC Power Jack
PC Card Slot
Modem Port
Flexible Bay
Front Panel
Wireless LAN On/Off Switch
SD/Memory Card Slot
Back Panel
Air Vents
Anti-theft Lock Slot
4. Activate Additional Utilities
If you have the wireless LAN configuration, please ensure the
wireless LAN switch is ON before clicking the "Click Me" icon.
• Windows 2000 users: Click the
icon on the desktop.
CLICK ME
• All other operating systems: Click
in the Start Menu.
CLICK ME
• Right click the Fujitsu Update Utility (FDU)
icon and
follow the on-screen instructions to update your drivers. For
more information, see your User's Guide.
Status Display Panel
Battery 1 and 2 Charging Indicator
Solid Green—fully charged or AC
adapter connected
Solid Orange—charging
Blinking Orange—charging
The Status Display Panel is
suspended due to temperature
located above the keyboard.
Hard Disk/CD Access Indicator
Following are some common
Lights when accessed
indicators.
Quick Tips
It takes approximately 6.5 hours
to charge the standard high
capacity battery if the notebook is
turned off or in Suspend mode, or
up to 17 hours if the notebook is
being used.
Optimizing Battery Life
• Set power management setting
to Maximize Battery Life.
• Adjust display brightness levels
to lowest comfortable setting.
• Remove the PC Card when not
needed.
• Utilize Suspend mode when not
using your notebook.
• Turn WLAN switch off to save
power if not using wireless LAN.
• Read the Power Management
section in your User's Guide for
additional features.
Adjusting display brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness
Adjusting volume
• Fn + F8 to decrease volume
• Fn + F9 to increase volume
Drivers
Look for the latest drivers on the Drivers and Applications Restore
CD, right click the FDU icon and select "update", or download them
at us.fujitsu.com/computers
Battery 1 and 2 Level Indicators
Solid Green—51% to 100% charged
Solid Orange 13% to 50% charged
Solid Red—0% to12% charged
Blinking Orange--measuring battery
status
Blinking Red—Problem with battery